EUVIMEDEUVIMED entdecken
Crossref

Magnetic Gear-Based Ferrite PM Vernier Generator for a Direct-Drive Wind Turbine

Poonam Sharma, V. Gowtham, S. Sashidhar

IEEE Transactions on Industrial Electronics · 2026-02 · 73 (2) · 1793-1803

DOI: 10.1109/tie.2025.3603072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2026-02. Verfasst von Poonam Sharma und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, direct-drive wind generators are becoming popular due to the absence of mechanical gearboxes, noiseless operation, high reliability and less maintenance. Usually, permanent magnet synchronous generators (PMSGs) are used for direct-drive wind energy conversion systems due to their high efficiency and voltage regulation. However, the speed of wind turbine blades is generally low, and hence a gear-box is required for grid-connected operation of the generator. Therefore, magnetic geared machines such as flux reversal generators (FRGs) and permanent magnet vernier generators (PMVGs), which have an inherent magnetic gearing effect, low-speed high-torque capability and high torque-to-weight ratio are becoming popular for direct-drive wind generators. In this article, an outer rotor surface-mounted PMVG with ferrite magnets is proposed. A 2-D finite element (FE) analysis is carried-out and the results are presented. In addition, a prototype is fabricated to measure the effectiveness of the proposed generator. Further, experimental validation is carried-out and performance parameters are measured and compared with 2-D FE analysis.

Zitieren

APA

Sharma, P., Gowtham, V., & Sashidhar, S. (2026). Magnetic Gear-Based Ferrite PM Vernier Generator for a Direct-Drive Wind Turbine. IEEE Transactions on Industrial Electronics, 73(2), 1793-1803. https://doi.org/10.1109/tie.2025.3603072

Vancouver

Sharma P, Gowtham V, Sashidhar S. Magnetic Gear-Based Ferrite PM Vernier Generator for a Direct-Drive Wind Turbine. IEEE Transactions on Industrial Electronics. 2026;73(2):1793-1803. doi:10.1109/tie.2025.3603072

BibTeX
@article{Sharma2026,
  author = {Sharma, Poonam and Gowtham, V. and Sashidhar, S.},
  title = {Magnetic Gear-Based Ferrite PM Vernier Generator for a Direct-Drive Wind Turbine},
  journal = {IEEE Transactions on Industrial Electronics},
  year = {2026},
  volume = {73},
  number = {2},
  pages = {1793--1803},
  doi = {10.1109/tie.2025.3603072}
}
Kostenlos starten →