Temperature-Based Contact Sensing and Force Estimation for Discrete-Jointed Continuum Robots
IEEE Transactions on Industrial Electronics · 2026-01 · 73 (1) · 973-983
DOI: 10.1109/tie.2025.3594450 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2026-01. Verfasst von Wentuo Yang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Open Research Project of Key Laboratory of Minimally Invasive Spinal Technologies and Materials of Shanghai Tongren Hospital, Key Project of Medical Engineering Interdisciplinary Research Fund of Shanghai Jiao Tong University.
Abstract (Originalsprache)
Contact force is a critical feedback mechanism for ensuring safe robot-environment interactions. Integrating dedicated force sensors into continuum robots (CRs) is difficult due to strict size constraints. Consequently, estimating contact forces based on the robot’s shape/curvature feedback has gained widespread recognition. This involves solving an optimization problem that minimizes the discrepancy between predicted and actual shapes/curvatures. However, this optimization problem is typically high-dimensional, which often leads the optimization to converge to local minima. This article introduces a novel framework for external force estimation based on temperature sensing. The number of external forces, their application points and directions are uniquely determined from the temperature variation during CR-human contact. These identified parameters are incorporated as known inputs into the optimization problem, substantially reducing its dimensionality and consequently improving global convergence, estimation accuracy, and computational efficiency. Based on the CR shape obtained from electromagnetic sensors, force estimation under conditions of known and unknown contact information was compared through simulations and experiments. Results show that the proposed framework significantly improves global convergence compared with methods without contact information, while also greatly reducing computation time. Furthermore, the framework requires only a few compact temperature sensors, which do not increase the overall size of the CR.
Förderung
- National Natural Science Foundation of China
- Open Research Project of Key Laboratory of Minimally Invasive Spinal Technologies and Materials of Shanghai Tongren Hospital
- Key Project of Medical Engineering Interdisciplinary Research Fund of Shanghai Jiao Tong University
- Project of Institute of Medical Robotics of Shanghai Jiao Tong University
Zitieren
APA
Yang, W., Liu, Z., Cao, Y., & Xie, L. (2026). Temperature-Based Contact Sensing and Force Estimation for Discrete-Jointed Continuum Robots. IEEE Transactions on Industrial Electronics, 73(1), 973-983. https://doi.org/10.1109/tie.2025.3594450
Vancouver
Yang W, Liu Z, Cao Y, Xie L. Temperature-Based Contact Sensing and Force Estimation for Discrete-Jointed Continuum Robots. IEEE Transactions on Industrial Electronics. 2026;73(1):973-983. doi:10.1109/tie.2025.3594450
BibTeX
@article{Yang2026,
author = {Yang, Wentuo and Liu, Zefeng and Cao, Yongfeng and Xie, Le},
title = {Temperature-Based Contact Sensing and Force Estimation for Discrete-Jointed Continuum Robots},
journal = {IEEE Transactions on Industrial Electronics},
year = {2026},
volume = {73},
number = {1},
pages = {973--983},
doi = {10.1109/tie.2025.3594450}
}
EUVIMED