EUVIMEDEUVIMED entdecken
Crossref

White-Box High-Frequency Impedance Modeling of Permanent Magnet Synchronous Machines Using Small-Signal Time-Harmonic Finite Element Analysis

Sa Zhu, Weizhong Fang, Runqing Ni, Zhaohai Jin, Zhuocheng Lu

IEEE Transactions on Industrial Electronics · 2025-12 · 72 (12) · 12298-12308

DOI: 10.1109/tie.2025.3572930 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2025-12. Verfasst von Sa Zhu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article advances a two-dimensional (2-D) coupled field-circuit small-signal time-harmonic finite element analysis (THFEA) method for achieving comprehensive modeling of high-frequency (HF) impedances in permanent magnet synchronous machines (PMSMs). The model incorporates a frequency-dependent complex differential reluctivity tensor to simulate the impact of hysteresis, eddy currents, and saturation in electrical steel sheets on self-inductance, mutual inductance, and iron loss resistance of the machines. To efficiently account for eddy current effects without requiring excessive mesh refinement in winding regions, a homogeneous material with equivalent complex permeability is used to replicate the influence of eddy currents on winding resistance and slot leakage inductance. Additionally, a practical approach is proposed to determine this equivalent complex permeability. Subsequently, the 2-D axisymmetric THFEA is then performed to evaluate end leakage inductance and resistance at varying frequencies. Besides, when computing parasitic capacitances, the impact of dielectric loss is considered based on the Debye model. The developed model not only accurately computes the HF impedances of PMSMs but also enables the prediction of overvoltage distribution at arbitrary locations within windings. Experimental validation was conducted on a PMSM with concentrated round-wire windings in the frequency domain and on a stator with distributed hairpin windings in the time domain.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhu, S., Fang, W., Ni, R., Jin, Z., & Lu, Z. (2025). White-Box High-Frequency Impedance Modeling of Permanent Magnet Synchronous Machines Using Small-Signal Time-Harmonic Finite Element Analysis. IEEE Transactions on Industrial Electronics, 72(12), 12298-12308. https://doi.org/10.1109/tie.2025.3572930

Vancouver

Zhu S, Fang W, Ni R, Jin Z, Lu Z. White-Box High-Frequency Impedance Modeling of Permanent Magnet Synchronous Machines Using Small-Signal Time-Harmonic Finite Element Analysis. IEEE Transactions on Industrial Electronics. 2025;72(12):12298-12308. doi:10.1109/tie.2025.3572930

BibTeX
@article{Zhu2025,
  author = {Zhu, Sa and Fang, Weizhong and Ni, Runqing and Jin, Zhaohai and Lu, Zhuocheng},
  title = {White-Box High-Frequency Impedance Modeling of Permanent Magnet Synchronous Machines Using Small-Signal Time-Harmonic Finite Element Analysis},
  journal = {IEEE Transactions on Industrial Electronics},
  year = {2025},
  volume = {72},
  number = {12},
  pages = {12298--12308},
  doi = {10.1109/tie.2025.3572930}
}
Kostenlos starten →