A Hybrid Add-on Damping Strategy for Self-Stabilization Nanopositioning System With High-Static-Low-Dynamic Stiffness Property
IEEE Transactions on Industrial Electronics · 2025-05 · 72 (5) · 5041-5050
DOI: 10.1109/tie.2024.3463013 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2025-05. Verfasst von Chengsi Huang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: Natural Science Foundation of China, Science and Technology Projects in Guangzhou, State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment.
Abstract (Originalsprache)
The inspection of micro/mini light-emitting diode (LED) display panels using industrial-level atomic force microscopes (AFM scanning head) demands a vibration isolator with high-ratio vibration reduction and high-precision positioning, in the presence of complex environmental disturbances. The motivation of this article is to combine the ability of passive and active damping methods to enhance the vibration isolation performance of the developed compliant self-stabilization system to further improve the inspection performance. This objective is achieved by modifying the system with a hybrid add-on damping (HAD) strategy that improves the vibration isolation in the resonant region. First, based on the analysis of the system, a HAD strategy is proposed to address the limitations of the passive-active vibration isolation strategy. Then, the design, modeling, and optimization of a flexure-based high-static-low-dynamics stiffness mechanism (FHSM) are demonstrated, which dampens the system without deteriorating the high-frequency transmissibility. Besides, an active bandwidth-limited damper (ABD) is developed to further enhance damping in the desired frequency range. Finally, a series of verification tests were conducted, including performance tests of vibration isolation and closed-loop positioning. The experimental results indicate that from 1 to 500 Hz, the vibration reduction ratio is achieved as 91% in the resonant region and over 94.5% in other frequencies. Besides, the steady-state positioning error is within $\boldsymbol{\pm}$0.1 $\boldsymbol{\mu}$m with a 2.5 kg load capacity. All the results uniformly confirm that the proposed HAD has successfully damped the system to achieve a higher vibration reduction ratio.
Förderung
- Natural Science Foundation of China
- Science and Technology Projects in Guangzhou
- State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment
- European Unions Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie
- Engineering Technology Center of Guangdong General University
Zitieren
APA
Huang, C., Lin, Z., Tang, H., Shu, S., & Liu, Q. (2025). A Hybrid Add-on Damping Strategy for Self-Stabilization Nanopositioning System With High-Static-Low-Dynamic Stiffness Property. IEEE Transactions on Industrial Electronics, 72(5), 5041-5050. https://doi.org/10.1109/tie.2024.3463013
Vancouver
Huang C, Lin Z, Tang H, Shu S, Liu Q. A Hybrid Add-on Damping Strategy for Self-Stabilization Nanopositioning System With High-Static-Low-Dynamic Stiffness Property. IEEE Transactions on Industrial Electronics. 2025;72(5):5041-5050. doi:10.1109/tie.2024.3463013
BibTeX
@article{Huang2025,
author = {Huang, Chengsi and Lin, Zhihang and Tang, Hui and Shu, Shiyu and Liu, Qiang},
title = {A Hybrid Add-on Damping Strategy for Self-Stabilization Nanopositioning System With High-Static-Low-Dynamic Stiffness Property},
journal = {IEEE Transactions on Industrial Electronics},
year = {2025},
volume = {72},
number = {5},
pages = {5041--5050},
doi = {10.1109/tie.2024.3463013}
}
EUVIMED