EUVIMEDEUVIMED entdecken
Crossref

Robotic Multiple Peg-in-Hole Assembly with Deviation Estimation and Fast Insertion Control

Dianxi Li, Xiangfei Li, Huan Zhao, Dongsheng Ge, Han Ding

IEEE Transactions on Industrial Electronics · 2025-01 · 72 (1) · 670-680

DOI: 10.1109/tie.2024.3406860 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2025-01. Verfasst von Dianxi Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the large state–action space and statically indeterminate problem, it is difficult to analyze the robotic multiple peg-in-hole (PIH) assembly tasks, which results in a scarcity of effective and general multiple PIH assembly strategies and control methods. This is particularly evident when faced with situations involving a large number of pegs and holes, as well as small fitting clearances. Besides, when the assembly components are visually inaccessible, there is a lack of efficient methods for deviation estimation, compensation, and adjustment. In order to deal with these problems, this study proposes a general three-stage strategy for robotic multiple PIH assembly which can simplify the planning and control methods. In the first stage, the contact state of the peg-hole is passively adjusted, thereby confining deviations within a plane. Building upon this, the second stage introduces a deviation estimation method that relies solely on force/torque information. In addition, a fast and effective control method for the final insertion stage is presented. Experiments are conducted on three sets of components with six or seven peg–hole pairs. The results demonstrate that the proposed strategy offers effective resolution for the complex multiple PIH tasks. Additionally, the deviation estimation method in the second stage has the ability to greatly compensate for the deviation and control the estimation error within an acceptable range. Lastly, the proposed insertion control method can efficiently complete the assembly in the presence of residual deviations caused by the deviation estimation method.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, D., Li, X., Zhao, H., Ge, D., & Ding, H. (2025). Robotic Multiple Peg-in-Hole Assembly with Deviation Estimation and Fast Insertion Control. IEEE Transactions on Industrial Electronics, 72(1), 670-680. https://doi.org/10.1109/tie.2024.3406860

Vancouver

Li D, Li X, Zhao H, Ge D, Ding H. Robotic Multiple Peg-in-Hole Assembly with Deviation Estimation and Fast Insertion Control. IEEE Transactions on Industrial Electronics. 2025;72(1):670-680. doi:10.1109/tie.2024.3406860

BibTeX
@article{Li2025,
  author = {Li, Dianxi and Li, Xiangfei and Zhao, Huan and Ge, Dongsheng and Ding, Han},
  title = {Robotic Multiple Peg-in-Hole Assembly with Deviation Estimation and Fast Insertion Control},
  journal = {IEEE Transactions on Industrial Electronics},
  year = {2025},
  volume = {72},
  number = {1},
  pages = {670--680},
  doi = {10.1109/tie.2024.3406860}
}
Kostenlos starten →