PWM-Current Source Converter Based on IGCT-in-Series for DC Buck and Constant-Current Application: Topology, Design, and Experiment
IEEE Transactions on Industrial Electronics · 2023-05 · 70 (5) · 4865-4874
DOI: 10.1109/tie.2022.3186385 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2023-05. Verfasst von Ruihang Bai und 7 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
PWM-current source converter (CSC) based on IGCT-in-series has the advantages in efficiency, reliability, cost, and controllability. It is a promising choice to replace silicon-controlled rectifier in dc buck and constant-current application, as well as to use in power transmission. This article first presents the series-IGCT-based CSC topology according to the IGCT device and CSC operation characteristics. On the basis of traditional CSC topology, di/dt-limitation inductor, absorption circuit, and voltage sharing circuit are set. Second, the commutation process of series-IGCT-based CSC in each stage of one ac period is analyzed to obtain the coupling model between overvoltage on device and converter parameters. Furthermore, a prototype of 10 kV, 1 kA series-IGCT-based CSC for transmission line deicing is designed in both parameter and structure. Finally, pulse switching and power-cycling experiments of implemented prototype are carried out. The results verify that with designed parameters, overvoltage on devices is within a safe range, and voltage unevenness among six units in series can be limited to 6.5%. Moreover, the prototype shows stability and reliability during long-term power-cycle operation, definitely verifying the feasibility of proposed series-IGCT-based CSC. Compared with IGBT, loss power of IGCT scheme is more than 10% lower, and reach the efficiency of 98.7%.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Bai, R., Zhao, B., Zhou, T., Tang, X., Li, J., Cui, B., Yu, Z., & Zeng, R. (2023). PWM-Current Source Converter Based on IGCT-in-Series for DC Buck and Constant-Current Application: Topology, Design, and Experiment. IEEE Transactions on Industrial Electronics, 70(5), 4865-4874. https://doi.org/10.1109/tie.2022.3186385
Vancouver
Bai R, Zhao B, Zhou T, Tang X, Li J, Cui B, et al. PWM-Current Source Converter Based on IGCT-in-Series for DC Buck and Constant-Current Application: Topology, Design, and Experiment. IEEE Transactions on Industrial Electronics. 2023;70(5):4865-4874. doi:10.1109/tie.2022.3186385
BibTeX
@article{Bai2023,
author = {Bai, Ruihang and Zhao, Biao and Zhou, Tianji and Tang, Xueteng and Li, Jianguo and Cui, Bin and Yu, Zhanqing and Zeng, Rong},
title = {PWM-Current Source Converter Based on IGCT-in-Series for DC Buck and Constant-Current Application: Topology, Design, and Experiment},
journal = {IEEE Transactions on Industrial Electronics},
year = {2023},
volume = {70},
number = {5},
pages = {4865--4874},
doi = {10.1109/tie.2022.3186385}
}
EUVIMED