Identification and Control of Linear Time-Varying Systems With Varying Uncertainty Degrees in Parameters: A Measurement-Based Approach
IEEE Transactions on Industrial Cyber-Physical Systems · 2026 · 4 · 1156-1167
DOI: 10.1109/ticps.2026.3740115 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Industrial Cyber-Physical Systems, 2026. Verfasst von Liguo Tan und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: Key Research and Development Program of Heilongjiang, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
This paper develops a measurement-based method for parameter identification and control correction of linear time-varying systems with heterogeneous levels of a priori parametric uncertainty. The formulation distinguishes adjustable parameters with known or unknown initial and target values from unknown fixed physical parameters. Using noisy sampled output measurements, a finite-dimensional residual model is constructed to estimate the unknown initial parameter values and physical parameters. An explicit generalized least-squares estimator is then derived through constrained covariance minimization. Under the stated residual-covariance and finite-horizon identifiability conditions, the estimator is finite-sample unbiased and minimum-variance within the class of linear unbiased estimators. Under independent repeated measurement/correction runs, strong and mean-square consistency are further established. The subsequent control-correction problem is formulated as a finite-dimensional quadratic tracking problem. A positive-definiteness condition on the control-information matrix guarantees a unique closed-form global minimizer within the selected control parameterization. A gas turbine engine idle-mode model is used as a numerical case study with synthetic process and measurement disturbances and ten independent stochastic realizations. The results illustrate the identification and correction procedure for constant and linear control parameterizations, with the latter yielding a lower final tracking error functional in the considered numerical case.
Förderung
- Key Research and Development Program of Heilongjiang
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
Zitieren
APA
Tan, L., Wen, G., Sun, K., Chu, X., & Nalchajyan, S. (2026). Identification and Control of Linear Time-Varying Systems With Varying Uncertainty Degrees in Parameters: A Measurement-Based Approach. IEEE Transactions on Industrial Cyber-Physical Systems, 4, 1156-1167. https://doi.org/10.1109/ticps.2026.3740115
Vancouver
Tan L, Wen G, Sun K, Chu X, Nalchajyan S. Identification and Control of Linear Time-Varying Systems With Varying Uncertainty Degrees in Parameters: A Measurement-Based Approach. IEEE Transactions on Industrial Cyber-Physical Systems. 2026;4:1156-1167. doi:10.1109/ticps.2026.3740115
BibTeX
@article{Tan2026,
author = {Tan, Liguo and Wen, Guanghui and Sun, Kangkang and Chu, Xu and Nalchajyan, Samvel},
title = {Identification and Control of Linear Time-Varying Systems With Varying Uncertainty Degrees in Parameters: A Measurement-Based Approach},
journal = {IEEE Transactions on Industrial Cyber-Physical Systems},
year = {2026},
volume = {4},
pages = {1156--1167},
doi = {10.1109/ticps.2026.3740115}
}
EUVIMED