Wireless Energy Harvesting for Autonomous Reconfigurable Intelligent Surfaces
IEEE Transactions on Green Communications and Networking · 2023-03 · 7 (1) · 114-129
DOI: 10.1109/tgcn.2022.3201190 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Green Communications and Networking, 2023-03. Verfasst von Konstantinos Ntontin und 9 weiteren Autor:innen. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Luxembourg National Research Fund (FNR) through the CORE Project RISOTTI, European Commission’s Horizon 2020 Research and Innovation Programme, Digital Futures center.
Abstract (Originalsprache)
In the current contribution, we examine the feasibility of fully-energy-autonomous operation of reconfigurable intelligent surfaces (RIS) through wireless energy harvesting (EH) from incident information signals. Towards this, we first identify the main RIS energy-consuming components and present a suitable and accurate energy-consumption model that is based on the recently proposed integrated controller architecture and includes the energy consumption needed for channel estimation. Building on this model, we introduce a novel RIS architecture that enables EH through RIS unit-cell (UC) splitting. Subsequently, we introduce an EH policy, where a subset of the UCs is used for beamsteering, while the remaining UCs absorb energy. In particular, we formulate a subset al.ocation optimization problem that aims at maximizing the signal-to-noise ratio (SNR) at the receiver without violating the RIS’s energy consumption demands. As a problem solution, we present low-complexity heuristic algorithms. The presented numerical results reveal the feasibility of the proposed architecture and the efficiency of the presented algorithms with respect to both the optimal and very high-complexity brute-force approach and the one corresponding to random subset selection. Furthermore, the results reveal how important the placement of the RIS as close to the transmitter as possible is, for increasing the harvesting effectiveness.
Förderung
- Luxembourg National Research Fund (FNR) through the CORE Project RISOTTI
- European Commission’s Horizon 2020 Research and Innovation Programme
- Digital Futures center
Zitieren
APA
Ntontin, K., Boulogeorgos, A. A., Bjornson, E., Martins, W. A., Kisseleff, S., Abadal, S., Alarcon, E., Papazafeiropoulos, A., Lazarakis, F. I., & Chatzinotas, S. (2023). Wireless Energy Harvesting for Autonomous Reconfigurable Intelligent Surfaces. IEEE Transactions on Green Communications and Networking, 7(1), 114-129. https://doi.org/10.1109/tgcn.2022.3201190
Vancouver
Ntontin K, Boulogeorgos AA, Bjornson E, Martins WA, Kisseleff S, Abadal S, et al. Wireless Energy Harvesting for Autonomous Reconfigurable Intelligent Surfaces. IEEE Transactions on Green Communications and Networking. 2023;7(1):114-129. doi:10.1109/tgcn.2022.3201190
BibTeX
@article{Ntontin2023,
author = {Ntontin, Konstantinos and Boulogeorgos, Alexandros-Apostolos A. and Bjornson, Emil and Martins, Wallace Alves and Kisseleff, Steven and Abadal, Sergi and Alarcon, Eduard and Papazafeiropoulos, Anastasios and Lazarakis, Fotis I. and Chatzinotas, Symeon},
title = {Wireless Energy Harvesting for Autonomous Reconfigurable Intelligent Surfaces},
journal = {IEEE Transactions on Green Communications and Networking},
year = {2023},
volume = {7},
number = {1},
pages = {114--129},
doi = {10.1109/tgcn.2022.3201190}
}
EUVIMED