Advanced Blue Perovskite Light-Emitting Devices Enabled by Functionalized MXene-Modified PEDOT:PSS With Improved Charge Balance
IEEE Transactions on Electron Devices · 2026-11 · 73 (11) · 6883-6890
DOI: 10.1109/ted.2026.3733937 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Electron Devices, 2026-11. Verfasst von Rajesh Kumar Tiwari und 1 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben.
Abstract (Originalsprache)
The light-emitting devices with blue perovskite light-emitting devices (PeLEDs) have been widely considered as promising candidates for next-generation display and solid-state lighting applications due to their high color purity and tunable emission spectrum; however, device performance is still hindered by inefficient hole injection, energy mismatch at the hole transport layer (HTL)/emissive layer interface, and carrier imbalance. We demonstrate a simulation-driven interface engineering approach to achieve high-performance blue PeLEDs using a functionalized Ti 3 C 2 T x MXene-modified PEDOT:PSS HTL. Prefabrication optimization of the device architecture and examination of the effect of MXene incorporation on carrier transport, electric-field distribution, recombination process, and energy-level alignment were performed using simulations of electron transport in flat geometry (SETFOS) optoelectronic simulations. The simulation results showed a decrease in carrier accumulation, a wider recombination distribution, and improved charge balance across the emissive region. These findings were used to design experimental devices, which were subsequently fabricated and systematically characterized. The functionalized MXene resulted in a work-function shift from approximately $-{5}.{10}$ to $-{5}.{60}$ eV, decreasing the hole injection barrier from ${0}.{70}$ to ${0}.{38}$ eV and improving interfacial energy alignment. Furthermore, the surface roughness was reduced from ${1}.{58}$ to ${1}.{23}$ nm after HTL modification, leading to improved film uniformity and enhanced emissive layer quality. The optimized device exhibited enhanced electrical and optical performance, with a reduced turn-on voltage from $\sim {3}.{6}$ to ${3}.{2}$ V, an increased current density from 148 to 172 mA cm ${}^{-{2}}$ , and an increased maximum luminance from ${6}.{8} ~\times ~{10}^{{3}}$ to ${1}.{12}~ \times ~{10}^{{4}}$ cd m ${}^{-{2}}$ . The external quantum efficiency (EQE) exhibited a remarkable enhancement from ${11}.{5}\%$ to ${17}.{08}\%$ (an increase of approximately ${48}.{5}\%$ ) while maintaining stable blue emission centered at approximately 490 nm. The excellent agreement between SETFOS predictions and experimental observations validates MXene-assisted HTL engineering as an effective strategy to achieve efficient charge balance and improve the performance of blue PeLEDs.
Zitieren
APA
Tiwari, R. K., & Nagar, M. R. (2026). Advanced Blue Perovskite Light-Emitting Devices Enabled by Functionalized MXene-Modified PEDOT:PSS With Improved Charge Balance. IEEE Transactions on Electron Devices, 73(11), 6883-6890. https://doi.org/10.1109/ted.2026.3733937
Vancouver
Tiwari RK, Nagar MR. Advanced Blue Perovskite Light-Emitting Devices Enabled by Functionalized MXene-Modified PEDOT:PSS With Improved Charge Balance. IEEE Transactions on Electron Devices. 2026;73(11):6883-6890. doi:10.1109/ted.2026.3733937
BibTeX
@article{Tiwari2026,
author = {Tiwari, Rajesh Kumar and Nagar, Mangey Ram},
title = {Advanced Blue Perovskite Light-Emitting Devices Enabled by Functionalized MXene-Modified PEDOT:PSS With Improved Charge Balance},
journal = {IEEE Transactions on Electron Devices},
year = {2026},
volume = {73},
number = {11},
pages = {6883--6890},
doi = {10.1109/ted.2026.3733937}
}
EUVIMED