EUVIMEDEUVIMED entdecken
Crossref

Predictive Reliability Modeling for NSFET Optimization---Part II: HCD and BTI

Stanislav Tyaginov, Ethan Kao, Christoph Jungemann, Alexander Makarov, Fabian M. Bufler, Luca Panarella, Joao Bastos, Sheng Yang, Michiel Vandemaele, Maarten L. Van de Put, Geert Hellings, Adrian Chasin und 2 weitere

IEEE Transactions on Electron Devices · 2026-08 · 73 (8) · 4572-4580

DOI: 10.1109/ted.2026.3678529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Electron Devices, 2026-08. Verfasst von Stanislav Tyaginov und 13 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: Research Foundation—Flanders.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We propose an extended version of the design technology co-optimization (DTCO) flow, which—in contrast to the commonly acknowledged DTCO paradigm relying on the power–performance–area (PPA) metric—considers reliability as a tangible parameter, thereby leading to a concept of PPAR (“R” stands for “reliability”). As a demonstration of this concept, we carry out a comprehensive reliability analysis of future imec nanosheet field-effect-transistor (NSFET) logic nodes with gate lengths scaling from 15 to $10{\,}$ nm. Our focus is placed on hot-carrier degradation (HCD) and bias temperature instability (BTI) modeling over stress time of up to ten years. For an accurate description of HCD, we employ our technology computer-aided design (TCAD)-based HCD model, which relies on the modeling of carrier transport. A thorough analysis of the electric field and carrier concentration shows that both quantities peak at the rounded nanosheet (NS) corners, which enhances HCD; the most severe HCD occurs in NSFETs with the smallest corner radii. BTI simulations—conducted with the nonradiative multiphonon (NMP) model—exhibit a similar behavior: BTI becomes stronger as the NS corners become sharper. Overall, all degradation metrics decrease monotonically as the NS corner radius increases. These results indicate that field-effect transistor (FET) architectures with larger NS corner radii provide improved robustness against both HCD and BTI, and should be favored for future technology nodes. Our concept allows considering the reliability of future (not yet fabricated) transistor nodes, thereby making reliability an essential DTCO ingredient.

Förderung

  • Research Foundation—Flanders

Zitieren

APA

Tyaginov, S., Kao, E., Jungemann, C., Makarov, A., Bufler, F. M., Panarella, L., Bastos, J., Yang, S., Vandemaele, M., Put, M. L. V. D., Hellings, G., Chasin, A., Kaczer, B., & Houssa, M. (2026). Predictive Reliability Modeling for NSFET Optimization---Part II: HCD and BTI. IEEE Transactions on Electron Devices, 73(8), 4572-4580. https://doi.org/10.1109/ted.2026.3678529

Vancouver

Tyaginov S, Kao E, Jungemann C, Makarov A, Bufler FM, Panarella L, et al. Predictive Reliability Modeling for NSFET Optimization---Part II: HCD and BTI. IEEE Transactions on Electron Devices. 2026;73(8):4572-4580. doi:10.1109/ted.2026.3678529

BibTeX
@article{Tyaginov2026,
  author = {Tyaginov, Stanislav and Kao, Ethan and Jungemann, Christoph and Makarov, Alexander and Bufler, Fabian M. and Panarella, Luca and Bastos, Joao and Yang, Sheng and Vandemaele, Michiel and Put, Maarten L. Van de and Hellings, Geert and Chasin, Adrian and Kaczer, Ben and Houssa, Michel},
  title = {Predictive Reliability Modeling for NSFET Optimization---Part II: HCD and BTI},
  journal = {IEEE Transactions on Electron Devices},
  year = {2026},
  volume = {73},
  number = {8},
  pages = {4572--4580},
  doi = {10.1109/ted.2026.3678529}
}
Kostenlos starten →