EUVIMEDEUVIMED entdecken
Crossref

Optimum Design of Asymmetric 4H-SiC Superjunction Devices for Wide Charge Imbalance Tolerance

Xuan Li, Nanbing Chen, Jinggui Zhou, Hanqing Zhao, Zhao Qi, Xiaochuan Deng, Teng Zhang, Zekun Zhou, Bolin Deng, Xiaorong Luo, Song Bai, Bo Zhang

IEEE Transactions on Electron Devices · 2026-06 · 73 (6) · 3298-3302

DOI: 10.1109/ted.2026.3675183 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Electron Devices, 2026-06. Verfasst von Xuan Li und 11 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this article, the optimum design of asymmetric silicon carbide (SiC) superjunction (SJ) devices is proposed, fully considering the anisotropy of SiC and charge imbalance influence. As asymmetry factor $\sigma $ (i.e., the ratio of N and P pillar width, ${W}_{\text {n}}$ / ${W}_{\text {p}}$ ) increases, the breakdown path shifts from a curve passing through the N–P interface midpoint to the N/P pillar midline. Accordingly, the optimum SJ pillar depth and doping design for minimum specific on-resistance ( ${R}_{\mathrm {on}\text {, sp}}$ ) is achieved with given pillar width and breakdown voltage ( BV ). Furthermore, the effect of $\sigma $ on charge imbalance tolerance (i.e., the doping variation range where the BV decrease less than 10%) is revealed. The tolerance increases with $\sigma $ , more than doubling from $\sigma =1.5$ to $\sigma =3$ . When P pillar doping ${N}_{\text {p}}$ is lower than the charge-balanced doping, the tolerance is wider than higher ${N}_{\text {p}}$ case, whereas ${N}_{\text {n}}$ has similar tolerance in both lower and higher cases. To achieve better tradeoff between ${R}_{\mathrm {on}\text {, sp}}$ –BV performance and charge imbalance tolerance, ${N}_{\text {p}}$ is recommended to be lower than balanced doping ( $\sigma \gt 1$ ), vice versa. The results provide deep theoretical insights into the asymmetric SiC SJ device. Meanwhile, the methodology enables cost-effective SiC SJ design, applying to various pillar widths and BV of 1.2–10 kV. The optimized design is particularly beneficial for high-efficiency, high-power-density traction inverters and onboard power systems in electric vehicles (EVs).

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, X., Chen, N., Zhou, J., Zhao, H., Qi, Z., Deng, X., Zhang, T., Zhou, Z., Deng, B., Luo, X., Bai, S., & Zhang, B. (2026). Optimum Design of Asymmetric 4H-SiC Superjunction Devices for Wide Charge Imbalance Tolerance. IEEE Transactions on Electron Devices, 73(6), 3298-3302. https://doi.org/10.1109/ted.2026.3675183

Vancouver

Li X, Chen N, Zhou J, Zhao H, Qi Z, Deng X, et al. Optimum Design of Asymmetric 4H-SiC Superjunction Devices for Wide Charge Imbalance Tolerance. IEEE Transactions on Electron Devices. 2026;73(6):3298-3302. doi:10.1109/ted.2026.3675183

BibTeX
@article{Li2026,
  author = {Li, Xuan and Chen, Nanbing and Zhou, Jinggui and Zhao, Hanqing and Qi, Zhao and Deng, Xiaochuan and Zhang, Teng and Zhou, Zekun and Deng, Bolin and Luo, Xiaorong and Bai, Song and Zhang, Bo},
  title = {Optimum Design of Asymmetric 4H-SiC Superjunction Devices for Wide Charge Imbalance Tolerance},
  journal = {IEEE Transactions on Electron Devices},
  year = {2026},
  volume = {73},
  number = {6},
  pages = {3298--3302},
  doi = {10.1109/ted.2026.3675183}
}
Kostenlos starten →