EUVIMEDEUVIMED entdecken
Crossref

Modeling and Improvement of Heat-Flow Paths Inside 3D-nand First-Level Packages With Internal Metal Structures

Hobeom Han, Jung Su Yoon, Eun Pyo Hong, Suk-Kang Sung, Sang Won Yoon

IEEE Transactions on Electron Devices · 2026-04 · 73 (4) · 2130-2136

DOI: 10.1109/ted.2026.3667123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Electron Devices, 2026-04. Verfasst von Hobeom Han und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Industry Grant from Samsung Electronics Company Ltd.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rising interface speeds and compact form factors have pushed nand flash solid-state drives (SSDs) toward their thermal limits. This work establishes a package-accurate thermal framework that integrates experiments, finite-element method (FEM) simulations, and a compact network model to guide first-level package (FLP) design. A detailed 3-D model of a commercial nand module was constructed and validated against decapsulated package measurements using an optical-fiber thermal sensor and infrared (IR) imaging, reproducing the measured saturation temperature near $80~^{\circ }$ C. The calibrated model reveals two dominant heat-flow paths—upward through the epoxy molding compound (EMC) and downward through solder joints into the printed-circuit board (PCB)—with the EMC and PCB identified as primary resistance bottlenecks. To address these limits, four embedded-metal designs were proposed. Compared with the ~ $80~^{\circ }$ C baseline, bulk metal, exposed bulk metal, a thermal pad, and a bridged heat spreader reduced hotspot temperature to $77.0~^{\circ }$ C, $75.4~^{\circ }$ C, $75.7~^{\circ }$ C, and $70.0~^{\circ }$ C, respectively, achieving up to 12.5% improvement. Resistance trends confirm that a thermal pad mainly enhances the topside path, whereas the heat spreader enables balanced upward and downward evacuation with the most uniform heat distribution.

Förderung

  • Industry Grant from Samsung Electronics Company Ltd

Zitieren

APA

Han, H., Yoon, J. S., Hong, E. P., Sung, S., & Yoon, S. W. (2026). Modeling and Improvement of Heat-Flow Paths Inside 3D-nand First-Level Packages With Internal Metal Structures. IEEE Transactions on Electron Devices, 73(4), 2130-2136. https://doi.org/10.1109/ted.2026.3667123

Vancouver

Han H, Yoon JS, Hong EP, Sung S, Yoon SW. Modeling and Improvement of Heat-Flow Paths Inside 3D-nand First-Level Packages With Internal Metal Structures. IEEE Transactions on Electron Devices. 2026;73(4):2130-2136. doi:10.1109/ted.2026.3667123

BibTeX
@article{Han2026,
  author = {Han, Hobeom and Yoon, Jung Su and Hong, Eun Pyo and Sung, Suk-Kang and Yoon, Sang Won},
  title = {Modeling and Improvement of Heat-Flow Paths Inside 3D-nand First-Level Packages With Internal Metal Structures},
  journal = {IEEE Transactions on Electron Devices},
  year = {2026},
  volume = {73},
  number = {4},
  pages = {2130--2136},
  doi = {10.1109/ted.2026.3667123}
}
Kostenlos starten →