EUVIMEDEUVIMED entdecken
Crossref

Dielectrically Graded Photocurable Nanocomposite Coating for Achieving Enhanced Surface Insulation and Long-Term Stability

Wen-Dong Li, Chao Wang, Yu-Cheng Zhang, Zhi-Hui Jiang, Jun-Bo Deng, Guan-Jun Zhang

IEEE Transactions on Dielectrics and Electrical Insulation · 2023-02 · 30 (1) · 174-183

DOI: 10.1109/tdei.2022.3210487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Dielectrics and Electrical Insulation, 2023-02. Verfasst von Wen-Dong Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: China Post-Doctoral Science Foundation, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface functionally graded material (SFGM) exhibits novelty and effectiveness in mitigating the catastrophic surface flashover of solid insulation. However, existing SFGMs mainly rely on sophisticated, time-consuming fabrication procedures, and usually demonstrate an inadequate long-term stability. This study developed a convenient, scalable SFGM fabrication method utilizing ultraviolet light (UV) curable coating, which has simplified processing, high flashover voltage (FOV), and strong adhesion to epoxy matrix. The coating material is a mixture of photocurable acrylic resin and perfluoro-silane-treated BaTiO3 (BT) nanoparticles, whose component formula and UV-curing technique were optimized according to the rheological and photocuring properties. The insulation performance of UV-SFGM was studied by flashover tests in a compressed gaseous medium. Long-term stability was investigated by the tests of interfacial adhesion, thermal cycling resistance, and hydrofluoric acid (HF) erosion tests. Experimental results show that FOV of UV-SFGM increases by 21.94% in 0.3 MPa SF6, which is attributed to the effective reduction of the maximum electric field. As for the long-term stability, the UV-SFGM has strong adhesion to epoxy/Al2O3 substrate (cross-cut level 5B and 6.54 MPa pull-off strength), especially when surface roughening on the substrate is carried out. Moreover, good resistance to thermal cycling and HF erosion is observed in the photocurable coatings. In summary, the proposed UV-SFGM has an accurate and efficient fabrication process, high insulation performance, and good long-term stability, making it promising in industrial applications.

Förderung

  • China Post-Doctoral Science Foundation
  • National Natural Science Foundation of China

Zitieren

APA

Li, W., Wang, C., Zhang, Y., Jiang, Z., Deng, J., & Zhang, G. (2023). Dielectrically Graded Photocurable Nanocomposite Coating for Achieving Enhanced Surface Insulation and Long-Term Stability. IEEE Transactions on Dielectrics and Electrical Insulation, 30(1), 174-183. https://doi.org/10.1109/tdei.2022.3210487

Vancouver

Li W, Wang C, Zhang Y, Jiang Z, Deng J, Zhang G. Dielectrically Graded Photocurable Nanocomposite Coating for Achieving Enhanced Surface Insulation and Long-Term Stability. IEEE Transactions on Dielectrics and Electrical Insulation. 2023;30(1):174-183. doi:10.1109/tdei.2022.3210487

BibTeX
@article{Li2023,
  author = {Li, Wen-Dong and Wang, Chao and Zhang, Yu-Cheng and Jiang, Zhi-Hui and Deng, Jun-Bo and Zhang, Guan-Jun},
  title = {Dielectrically Graded Photocurable Nanocomposite Coating for Achieving Enhanced Surface Insulation and Long-Term Stability},
  journal = {IEEE Transactions on Dielectrics and Electrical Insulation},
  year = {2023},
  volume = {30},
  number = {1},
  pages = {174--183},
  doi = {10.1109/tdei.2022.3210487}
}
Kostenlos starten →