EUVIMEDEUVIMED entdecken
Crossref

Design and Analysis of a Ka-Band CMOS Power Amplifier Employing a Pseudo-Cascode Output Stage With Dual Multi-Finger Configuration

Yo-Sheng Lin, Chung-Ta Huang, Yu-Rong He

IEEE Transactions on Circuits and Systems II: Express Briefs · 2026-08 · 73 (8) · 788-792

DOI: 10.1109/tcsii.2026.3704292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Circuits and Systems II: Express Briefs, 2026-08. Verfasst von Yo-Sheng Lin und 2 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Gefördert von: National Science and Technology Council of Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a Ka-band CMOS power amplifier (PA). The proposed PA comprises an input transformer, a common-source (CS) input stage, a pseudo-cascode output stage, and an output transformer. Neutralization capacitors are used in the input and output stages to enhance gain and power-added efficiency (PAE) while ensuring unconditional stability. Coupled-line feedback is incorporated in the input stage to further improve gain and PAE. In addition, the CS transistors in the output stage adopt a dual multi-finger configuration with optimized gate dimensions of $4.3\times 24 ~\mu $ m and $4.3\times 26 ~\mu $ m connected in parallel. This design increases transconductance and gain, thereby improving PAE and output power (P ${}_{\mathrm {out}}$ ). To further enhance P out by 1 dBm and PAE by 4%, while simplifying the biasing scheme, an input-power-dependent dynamic self-biasing technique is applied to the common-gate (CG) transistors in the output stage, referred to as a pseudo-cascode topology. This approach eliminates the need for external gate biasing. The PA occupies a compact area of 0.109 mm 2 and attains a gain of $19.6\pm ~1.5$ dB over 26–36.8 GHz, corresponding to a 3 dB bandwidth of 10.6 GHz. At 30 GHz, the PA achieves a P out of 20.2 dBm, an output 1 dB compression point (OP ${}_{\mathrm {1dB}}$ ) of 19.4 dBm, and a peak PAE of 35%, resulting in an excellent figure of merit (FoM) of 3.07 W/mm 2 .

Förderung

  • National Science and Technology Council of Taiwan

Zitieren

APA

Lin, Y., Huang, C., & He, Y. (2026). Design and Analysis of a Ka-Band CMOS Power Amplifier Employing a Pseudo-Cascode Output Stage With Dual Multi-Finger Configuration. IEEE Transactions on Circuits and Systems II: Express Briefs, 73(8), 788-792. https://doi.org/10.1109/tcsii.2026.3704292

Vancouver

Lin Y, Huang C, He Y. Design and Analysis of a Ka-Band CMOS Power Amplifier Employing a Pseudo-Cascode Output Stage With Dual Multi-Finger Configuration. IEEE Transactions on Circuits and Systems II: Express Briefs. 2026;73(8):788-792. doi:10.1109/tcsii.2026.3704292

BibTeX
@article{Lin2026,
  author = {Lin, Yo-Sheng and Huang, Chung-Ta and He, Yu-Rong},
  title = {Design and Analysis of a Ka-Band CMOS Power Amplifier Employing a Pseudo-Cascode Output Stage With Dual Multi-Finger Configuration},
  journal = {IEEE Transactions on Circuits and Systems II: Express Briefs},
  year = {2026},
  volume = {73},
  number = {8},
  pages = {788--792},
  doi = {10.1109/tcsii.2026.3704292}
}
Kostenlos starten →