EUVIMEDEUVIMED entdecken
Crossref

Energy Efficiency Maximization in RSMA-Based LEO Satellite Networks Assisted by UAV-Mounted BD-Active RIS: A Hybrid DRL Strategy

Rahman Saadat Yeganeh, Hamid Behroozi, Mohammad Javad Omidi, Mohammad Robat Mili, Symeon Chatzinotas, Eduard Axel Jorswieck

IEEE Transactions on Communications · 2026 · 74 · 16422-16438

DOI: 10.1109/tcomm.2026.3747993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Communications, 2026. Verfasst von Rahman Saadat Yeganeh und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: INSF, the R&D Center of MCI, and the TDCCC, Federal Ministry of Research, Technology and Space (BMFTR), Germany, through the Project xG-RIC, Nitride Technology Center’s NTC BRIGHT initiative.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a novel non-terrestrial communication architecture that integrates Rate-Splitting Multiple Access (RSMA) with a UAV-mounted Beyond-Diagonal Active Reconfigurable Intelligent Surface (BD-ARIS) under the coverage of a Low Earth Orbit (LEO) satellite. The BD-ARIS employs a group-connected structure to provide signal amplification and enhanced beamforming flexibility, while RSMA splits user messages into common and private parts to improve SE and interference management. A joint optimization of satellite beamforming, UAV placement, power allocation, and RIS configuration is formulated to maximize the system overall energy efficiency. To solve the resulting non-convex, high-dimensional problem, we first develop a model-based iterative algorithm using Dinkelbach transform, weighted minimum mean-square error reformulation, successive convex approximation, and sequential quadratic programming. We then propose two deep reinforcement learning (DRL) approaches: a standard trust-region policy optimization (TRPO) baseline and a novel Dinkelbach-Guided TRPO (DG-TRPO) scheme. DG-TRPO is initialized via supervised pretraining on Dinkelbach solutions and subsequently fine-tuned with TRPO in noisy, time-varying environments. Simulation results show that DG-TRPO closely matches the model-based benchmark while providing sub-millisecond inference, making it suitable for real-time LEO operation. It also exhibits superior robustness to CSI uncertainty and satellite mobility, and the RSMA BD-ARIS framework significantly outperforms benchmarks employing NOMA or conventional RIS designs. These results establish the proposed architecture and DG-TRPO algorithm as a scalable, energy-efficient solution for future 6G massive IoT non-terrestrial networks.

Förderung

  • INSF, the R&D Center of MCI, and the TDCCC
  • Federal Ministry of Research, Technology and Space (BMFTR), Germany, through the Project xG-RIC
  • Nitride Technology Center’s NTC BRIGHT initiative
  • zukunft.niedersachsen, the joint science funding program of the Lower Saxony Ministry of Science and Culture and the Volkswagen Foundation

Zitieren

APA

Yeganeh, R. S., Behroozi, H., Omidi, M. J., Mili, M. R., Chatzinotas, S., & Jorswieck, E. A. (2026). Energy Efficiency Maximization in RSMA-Based LEO Satellite Networks Assisted by UAV-Mounted BD-Active RIS: A Hybrid DRL Strategy. IEEE Transactions on Communications, 74, 16422-16438. https://doi.org/10.1109/tcomm.2026.3747993

Vancouver

Yeganeh RS, Behroozi H, Omidi MJ, Mili MR, Chatzinotas S, Jorswieck EA. Energy Efficiency Maximization in RSMA-Based LEO Satellite Networks Assisted by UAV-Mounted BD-Active RIS: A Hybrid DRL Strategy. IEEE Transactions on Communications. 2026;74:16422-16438. doi:10.1109/tcomm.2026.3747993

BibTeX
@article{Yeganeh2026,
  author = {Yeganeh, Rahman Saadat and Behroozi, Hamid and Omidi, Mohammad Javad and Mili, Mohammad Robat and Chatzinotas, Symeon and Jorswieck, Eduard Axel},
  title = {Energy Efficiency Maximization in RSMA-Based LEO Satellite Networks Assisted by UAV-Mounted BD-Active RIS: A Hybrid DRL Strategy},
  journal = {IEEE Transactions on Communications},
  year = {2026},
  volume = {74},
  pages = {16422--16438},
  doi = {10.1109/tcomm.2026.3747993}
}
Kostenlos starten →