Hardware-Aware Optimization for RIS-Aided MIMO Systems With Nonlinear Power Amplifiers
IEEE Transactions on Communications · 2026 · 74 · 10126-10139
DOI: 10.1109/tcomm.2026.3704217 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Communications, 2026. Verfasst von Bin Liu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Saxon State government out of the State budget approved by the Saxon State Parliament, German Federal Ministry of Research, Technology and Space (BMFTR) within the national initiative on 6G Communication Systems through the transfer hub 6G-life, German Research Foundation.
Abstract (Originalsprache)
The integration of reconfigurable intelligent surfaces (RIS) into multiple-input multiple-output (MIMO) systems holds transformative potential for enhancing spectral efficiency (SE). However, practical deployment faces critical challenges stemming from hardware impairments, particularly the nonlinearity of power amplifiers (PAs) at the MIMO transmitter, which causes signal distortion that propagates through the RIS-reflected channel. To bridge this gap, this paper investigates a holistic hardware-aware design that jointly optimizes the RIS phase shifts and the base station transmit precoder under a realistic nonlinear PA model. We propose a joint optimization framework that explicitly balances beamforming gain and nonlinear distortion suppression. Specifically, we develop an alternating optimization (AO) framework in which the fixed-precoder RIS phase design is formulated as a constrained unimodular fractional quadratic program and solved via a Dinkelbach-based projected gradient ascent procedure, while the fixed-RIS precoder design is refined through a successive convex approximation (SCA)-based iterative update. Furthermore, to address latency- and complexity-constrained scenarios, we develop a low-complexity RIS-aware zero third-order distortion (Z3RO) joint design approach, in which the BS precoder inherits the Z3RO distortion-nulling structure through the effective cascaded channel and is combined with iterative RIS phase adaptation. Simulation results demonstrate that the proposed methods can achieve at least a 36.4% increase in SE over conventional benchmarks under PA nonlinearity.
Förderung
- Saxon State government out of the State budget approved by the Saxon State Parliament
- German Federal Ministry of Research, Technology and Space (BMFTR) within the national initiative on 6G Communication Systems through the transfer hub 6G-life
- German Research Foundation
- Germany’s Excellence Strategy–EXC 2050/2-Project ID
- Cluster of Excellence “Centre for Tactile Internet with Human-in-the-Loop”
Zitieren
APA
Liu, B., Schaefer, R. F., & Fettweis, G. P. (2026). Hardware-Aware Optimization for RIS-Aided MIMO Systems With Nonlinear Power Amplifiers. IEEE Transactions on Communications, 74, 10126-10139. https://doi.org/10.1109/tcomm.2026.3704217
Vancouver
Liu B, Schaefer RF, Fettweis GP. Hardware-Aware Optimization for RIS-Aided MIMO Systems With Nonlinear Power Amplifiers. IEEE Transactions on Communications. 2026;74:10126-10139. doi:10.1109/tcomm.2026.3704217
BibTeX
@article{Liu2026,
author = {Liu, Bin and Schaefer, Rafael F. and Fettweis, Gerhard P.},
title = {Hardware-Aware Optimization for RIS-Aided MIMO Systems With Nonlinear Power Amplifiers},
journal = {IEEE Transactions on Communications},
year = {2026},
volume = {74},
pages = {10126--10139},
doi = {10.1109/tcomm.2026.3704217}
}
EUVIMED