The Design of a High-Throughput Hardware Architecture for the AES-GCM Algorithm
IEEE Transactions on Consumer Electronics · 2024-02 · 70 (1) · 425-432
DOI: 10.1109/tce.2023.3332872 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Consumer Electronics, 2024-02. Verfasst von Ming-Bo Lin und 1 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 23 Literaturangaben.
Abstract (Originalsprache)
This paper proposes the hardware architecture capable of processing the AES-GCM algorithm in parallel and pipeline. To boost the hardware efficiency, two parallel AES processing units, each consisting of a mixed inner- and outer-round pipelining architecture, are employed in the encryption/decryption module. These two AES units share a key expansion unit to save the hardware resource. To optimize the architecture of the AES algorithm, the S-box function is directly realized with the built-in BRAM in the FPGA technique to decrease the number of LUTs used, and implemented with the composite field operation in the ASIC technique in order to save up to 25% logic gates. In the GHASH module design, two pipelining finite field GF $(2^{128})$ multipliers with appropriate data scheduling are utilized. In addition, realizing the finite field multiplication with the Karatsuba algorithm can further save 50.7% of hardware resource. The resulting AES-GCM IP has been implemented and verified with a Xilinx Virtex 5 series device (XC5VLX220), and a tsmc 0.18- $\mu \text{m}$ cell library. In FPGA verification, the working frequency can achieve 223.314 MHz, yielding the maximum throughputs of 57.17 Gbps. The number of slices/BRAMs used is 5,944/109. The resulting ASIC can operate at 197.239 MHz in simulation and achieve a high throughput of 50.49 Gbps. The core area of the chip is $6,552\,\,\mu \text{m}\,\, \times 6,516 \, \mu \text{m}$ . The power consumption is 1,466.5 mW.
Zitieren
APA
Lin, M., & Chuang, J. (2024). The Design of a High-Throughput Hardware Architecture for the AES-GCM Algorithm. IEEE Transactions on Consumer Electronics, 70(1), 425-432. https://doi.org/10.1109/tce.2023.3332872
Vancouver
Lin M, Chuang J. The Design of a High-Throughput Hardware Architecture for the AES-GCM Algorithm. IEEE Transactions on Consumer Electronics. 2024;70(1):425-432. doi:10.1109/tce.2023.3332872
BibTeX
@article{Lin2024,
author = {Lin, Ming-Bo and Chuang, Jen-Hua},
title = {The Design of a High-Throughput Hardware Architecture for the AES-GCM Algorithm},
journal = {IEEE Transactions on Consumer Electronics},
year = {2024},
volume = {70},
number = {1},
pages = {425--432},
doi = {10.1109/tce.2023.3332872}
}
EUVIMED