3D Printing-Enabled Near-Field Probe for Millimeter-Wave Skin Cancer Tumor Imaging
IEEE Transactions on Biomedical Engineering · 2026-09 · 73 (9) · 3205-3213
DOI: 10.1109/tbme.2025.3648778 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Biomedical Engineering, 2026-09. Verfasst von Meisam Esfandiari und 4 weiteren Autor:innen. Hauptthemen laut MEDLINE: Skin Neoplasms, Printing, Three-Dimensional, Microwave Imaging. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: University of Technology Sydney, Australian Research Council, Mid-Career Industry Fellowships.
Abstract (Originalsprache)
A novel 3D-printed microwave probe operating in the 25-45 GHz frequency range is designed and fabricated for early skin tumor detection using signal processing. Due to the highly lossy nature of the skin, electromagnetic wave penetration is difficult. To overcome this limitation, a multi-section probe design was developed to enhance wave penetration into the skin layer. This design effectively mitigates the effects of high-loss tangents in tissues and compensates for the small size of tumors, aiding in early detection. The probe's performance is validated through simulations and experimental measurements, showing excellent agreement. For imaging evaluation, a phantom model composed of pork skin, measuring 30 mm × 30 mm with a skin thickness of 4 mm, is utilized. A total of 215 scanning points were analyzed, and time-domain reflection waves were extracted, demonstrating the probe's ability to detect variations in tissue properties accurately. These signals were then processed using an entropy-based method. The reconstructed images across various scenarios highlight the effectiveness of the proposed probe in achieving high-resolution microwave imaging, indicating its strong potential for non-invasive, early-stage tumor detection.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Förderung
- University of Technology Sydney
- Australian Research Council
- Mid-Career Industry Fellowships
Zitieren
APA
Esfandiari, M., Amiri, M., Lai, J., Lv, X., & Yang, Y. (2026). 3D Printing-Enabled Near-Field Probe for Millimeter-Wave Skin Cancer Tumor Imaging. IEEE Transactions on Biomedical Engineering, 73(9), 3205-3213. https://doi.org/10.1109/tbme.2025.3648778
Vancouver
Esfandiari M, Amiri M, Lai J, Lv X, Yang Y. 3D Printing-Enabled Near-Field Probe for Millimeter-Wave Skin Cancer Tumor Imaging. IEEE Transactions on Biomedical Engineering. 2026;73(9):3205-3213. doi:10.1109/tbme.2025.3648778
BibTeX
@article{Esfandiari2026,
author = {Esfandiari, Meisam and Amiri, Majid and Lai, Jiexin and Lv, Xiaojing and Yang, Yang},
title = {3D Printing-Enabled Near-Field Probe for Millimeter-Wave Skin Cancer Tumor Imaging},
journal = {IEEE Transactions on Biomedical Engineering},
year = {2026},
volume = {73},
number = {9},
pages = {3205--3213},
doi = {10.1109/tbme.2025.3648778}
}
EUVIMED