Distributed Predefined-Time Leader–Follower Formation Control for Heterogeneous Wheeled Mobile Robots
IEEE Transactions on Automation Science and Engineering · 2026 · 23 · 6687-6697
DOI: 10.1109/tase.2026.3673594 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Automation Science and Engineering, 2026. Verfasst von Shiyu Yin und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
This paper investigates the predefined-time (PdT) formation control problem for heterogeneous wheeled mobile robots (WMRs) with complex nonlinear terms. To address the challenges arising from system heterogeneity and distributed coordination, a reference-tracking control framework is proposed. The first layer is a reference signal generation layer, where PdT formation trajectories are generated by signal generators, with local observers embedded in each agent to estimate the leader’s state when direct access is unavailable. The second layer is an agents tracking layer, where each WMR follows its assigned reference trajectories. By coordinating these two layers, the proposed framework enables distributed formation control within a predefined time. To achieve PdT tracking, a sliding mode control strategy enhanced with fuzzy logic control is developed in the tracking layer. Lyapunov-based analysis is conducted for both layers to ensure PdT stability and provide explicit convergence-time guarantees. Simulation results are presented to validate the theoretical analysis and demonstrate the effectiveness of the proposed method. Note to Practitioners—This paper presents a distributed formation control framework for heterogeneous WMRs in industrial environments, with particular applications in automated warehouse logistics and smart manufacturing systems. The proposed control scheme enables engineers to specify the desired formation completion time according to operational requirements, achieving a balance between motion efficiency and energy consumption through its predefined-time convergence property. The hierarchical control architecture demonstrates robust coordination capability for both two-wheeled and three-wheeled mobile robots, while effectively compensating for mechanical discrepancies and payload variations commonly encountered in industrial settings. A distinctive feature of this approach lies in its simplified parameter tuning process, where only the convergence time specification is required, thereby significantly reducing deployment complexity and facilitating rapid implementation across various industrial robotic platforms. This framework substantially improves the cooperative performance of heterogeneous WMRs.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Yin, S., Chen, C., & Xiang, Z. (2026). Distributed Predefined-Time Leader–Follower Formation Control for Heterogeneous Wheeled Mobile Robots. IEEE Transactions on Automation Science and Engineering, 23, 6687-6697. https://doi.org/10.1109/tase.2026.3673594
Vancouver
Yin S, Chen C, Xiang Z. Distributed Predefined-Time Leader–Follower Formation Control for Heterogeneous Wheeled Mobile Robots. IEEE Transactions on Automation Science and Engineering. 2026;23:6687-6697. doi:10.1109/tase.2026.3673594
BibTeX
@article{Yin2026,
author = {Yin, Shiyu and Chen, Chen and Xiang, Zhengrong},
title = {Distributed Predefined-Time Leader–Follower Formation Control for Heterogeneous Wheeled Mobile Robots},
journal = {IEEE Transactions on Automation Science and Engineering},
year = {2026},
volume = {23},
pages = {6687--6697},
doi = {10.1109/tase.2026.3673594}
}
EUVIMED