First Integration and Testing of the Medium-Frequency Small Aperture Telescope Detector Module for CMB-S4
IEEE Transactions on Applied Superconductivity · 2026-09 · 36 (6) · 2503107-2503107
DOI: 10.1109/tasc.2026.3693216 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-09. Verfasst von A. Patel und 11 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Gefördert von: Jet Propulsion Laboratory, California Institute of Technology, National Aeronautics and Space Administration, U.S. Department of Energy.
Abstract (Originalsprache)
The cosmic microwave background (CMB)-S4 experiment was in the process of developing next-generation ground-based microwave telescopes to observe the CMB polarization signals. CMB-S4 uses superconducting transition edge sensor (TES) bolometers that operate at a bath temperature of 100 mK. To test the optical properties of the CMB-S4 detector wafers, a prototype focal plane module has been commissioned at the California Institute of Technology. The fixture was adapted from a historical Keck Array $\text{40}\,\text{GHz}$ focal plane, populated with Superconducting Quantum Interference Device multiplexing chips (Irwin et al., 2001). The key elements of the prototype focal plane module include: a top aluminum plate, feedhorn with an integrated waveguide interface plate, Keck Array $\text{40}\,\text{GHz}$ printed circuit board (PCB), CMB-S4 wafer, custom-made adapter PCB, feedhorn–backshort spacers, backshort and backplate. Each detector in the wafer has two TESs: aluminum manganese (AlMn), and titanium (Ti). Ti has a higher critical temperature, and is therefore measurable in Caltech’s test cryostat, which has a higher loading environment. The setup currently exists to take optical efficiency measurements, near-field beam maps, and measure spectral responses. The fixture will then be integrated into a sub-Kelvin cryostat, enabling the measurement of both Ti and AlMn transitions. This will provide optical efficiency data for both scientific and laboratory purposes for AlMn and Ti, respectively.
Förderung
- Jet Propulsion Laboratory, California Institute of Technology
- National Aeronautics and Space Administration
- U.S. Department of Energy
- High Energy Physics
- National Energy Research Scientific Computing Center
- DOE Office of Science User Facility
- Divisions of Physics and Astronomical Sciences
- National Science Foundation
Zitieren
APA
Patel, A., Bock, J. J., Frez, C., Hui, H., Lau, K., Nguyen, H. T., O’Brient, R., Simon, S. M., Steinbach, B., Suzuki, A., Turner, A. D., & Weber, A. C. (2026). First Integration and Testing of the Medium-Frequency Small Aperture Telescope Detector Module for CMB-S4. IEEE Transactions on Applied Superconductivity, 36(6), 2503107-2503107. https://doi.org/10.1109/tasc.2026.3693216
Vancouver
Patel A, Bock JJ, Frez C, Hui H, Lau K, Nguyen HT, et al. First Integration and Testing of the Medium-Frequency Small Aperture Telescope Detector Module for CMB-S4. IEEE Transactions on Applied Superconductivity. 2026;36(6):2503107-2503107. doi:10.1109/tasc.2026.3693216
BibTeX
@article{Patel2026,
author = {Patel, A. and Bock, J. J. and Frez, C. and Hui, H. and Lau, K. and Nguyen, H. T. and O’Brient, R. and Simon, S. M. and Steinbach, B. and Suzuki, A. and Turner, A. D. and Weber, A. C.},
title = {First Integration and Testing of the Medium-Frequency Small Aperture Telescope Detector Module for CMB-S4},
journal = {IEEE Transactions on Applied Superconductivity},
year = {2026},
volume = {36},
number = {6},
pages = {2503107--2503107},
doi = {10.1109/tasc.2026.3693216}
}
EUVIMED