EUVIMEDEUVIMED entdecken
Crossref

Electroformed Absorbers for Transition Edge Sensors in Astrophysical Applications

Kasun Wimalasena, Daniel Becker, Douglas Bennet, Adrika Dasgupta, Mark Keller, Fabian Kislat, Merlin Kole, Daniel Schmidt, Daniel Swetz

IEEE Transactions on Applied Superconductivity · 2026-09 · 36 (6) · 1-6

DOI: 10.1109/tasc.2026.3682071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-09. Verfasst von Kasun Wimalasena und 8 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: NASA Astrophysics Research and Analysis.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transition-edge sensor (TES)-based microcalorimeter detectors are an attractive option for future hard X-ray and gamma-ray telescopes due to their excellent energy resolution. As high performance single photon detectors, TESs offer unprecedented energy resolution compared to scintillator detectors, cryogenic high-purity Germanium detectors and room temperature semiconductor detectors that are currently used as telescope detectors in the hard X-ray and gamma ray regime. TES detectors typically utilize a thin film of superconducting material and an absorbing structure made with a high-Z material as the photon absorber. The photon collection efficiency is directly influenced by the material and the design of the absorbing structure. For astrophysical missions, where one requires the sensitivity, and therefore the collection efficiency to be maximal for a minimal detector mass, optimization of these absorbers is crucial. Sn (Z = 50) absorbers have been identified as a good candidate to be used in TESs in hard X-ray and gamma-ray detectors. However, the high precision in surface quality and their small (mm) size make uniform production challenging. Current fabrication methods involve mechanical processing, which often results in uneven edges and surfaces. In addition, manually attaching these irregular absorbers compromises their precise placement and increases the dead space between neighboring pixels in the detector array, thereby reducing the overall detector efficiency. In this study, we report the development process of using electroforming techniques to fabricate Sn absorbers with high dimensional accuracy. The primary goal is to minimize the dead space between neighboring absorbers. In this method, a 3-D printed mold with predefined structural features, attached to a hard polymer substrate, was used to deposit Sn via the electroforming technique. In this article, we will discuss the preliminary results of the electroformed Sn absorbers.

Förderung

  • NASA Astrophysics Research and Analysis

Zitieren

APA

Wimalasena, K., Becker, D., Bennet, D., Dasgupta, A., Keller, M., Kislat, F., Kole, M., Schmidt, D., & Swetz, D. (2026). Electroformed Absorbers for Transition Edge Sensors in Astrophysical Applications. IEEE Transactions on Applied Superconductivity, 36(6), 1-6. https://doi.org/10.1109/tasc.2026.3682071

Vancouver

Wimalasena K, Becker D, Bennet D, Dasgupta A, Keller M, Kislat F, et al. Electroformed Absorbers for Transition Edge Sensors in Astrophysical Applications. IEEE Transactions on Applied Superconductivity. 2026;36(6):1-6. doi:10.1109/tasc.2026.3682071

BibTeX
@article{Wimalasena2026,
  author = {Wimalasena, Kasun and Becker, Daniel and Bennet, Douglas and Dasgupta, Adrika and Keller, Mark and Kislat, Fabian and Kole, Merlin and Schmidt, Daniel and Swetz, Daniel},
  title = {Electroformed Absorbers for Transition Edge Sensors in Astrophysical Applications},
  journal = {IEEE Transactions on Applied Superconductivity},
  year = {2026},
  volume = {36},
  number = {6},
  pages = {1--6},
  doi = {10.1109/tasc.2026.3682071}
}
Kostenlos starten →