EUVIMEDEUVIMED entdecken
Crossref

Research on the Design Method of Coil for the Cos-theta High-Field Low-Temperature Superconducting Magnet With Small Round Superconducting Cable

Zhengnan Han, Mingzhi Guan, Wei Wu, Yu Liang, Canjie Xin, Tongjun Yang, Tianfa Liao

IEEE Transactions on Applied Superconductivity · 2026-08 · 36 (5) · 1-5

DOI: 10.1109/tasc.2026.3678283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-08. Verfasst von Zhengnan Han und 6 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Gefördert von: Special Fund for Basic Research on Major Scientific Instruments of National Natural Science Foundation of China, National Natural Science Foundation of China, Youth Talent Foundation of Gansu Province in China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper introduces a cos-theta type large-aperture high-field dipole magnet, which is wound with small round superconducting cables (Nb3Sn and NbTi cables). The magnet coils are fabricated by processing grooves on a stainless steel former and winding the cables into these grooves. Compared with the commonly used Rutherford cable, the small round cables can be arranged more flexibly to achieve the required magnetic field. The formers and grooves provide support for the coils and help distribute the stress. Excessive grooves can reduce the magnet's magnetic efficiency, increase the magnet's volume, and raise the amount of superconducting wire used. Conversely, too few grooves can lead to insufficient support for the coils, making them prone to deformation, increasing the difficulty of winding, and raising the risk of stress concentration. This paper describes the coil structure and presents a coil design method based on linear programming algorithms. Various groove schemes, such as ‘all-wide grooves’, ‘all-narrow grooves’, and ‘end-narrow grooves with straight-side wide grooves’ are proposed, with detailed design methods and multiple sets of design results provided. Two-dimensional and three-dimensional finite element models of the coils are established. Based on the calculation results, the advantages and disadvantages of different schemes, as well as their applicability, are discussed from the perspectives of magnetic field design, structure design, and manufacturing process for both Nb3Sn and NbTi magnets.

Förderung

  • Special Fund for Basic Research on Major Scientific Instruments of National Natural Science Foundation of China
  • National Natural Science Foundation of China
  • Youth Talent Foundation of Gansu Province in China
  • Guangdong Provincial Yuehui Joint Fund Regional Cultivation Project in China
  • Guangdong Provincial Yuehui Joint Fund Regional Key Project in China

Zitieren

APA

Han, Z., Guan, M., Wu, W., Liang, Y., Xin, C., Yang, T., & Liao, T. (2026). Research on the Design Method of Coil for the Cos-theta High-Field Low-Temperature Superconducting Magnet With Small Round Superconducting Cable. IEEE Transactions on Applied Superconductivity, 36(5), 1-5. https://doi.org/10.1109/tasc.2026.3678283

Vancouver

Han Z, Guan M, Wu W, Liang Y, Xin C, Yang T, et al. Research on the Design Method of Coil for the Cos-theta High-Field Low-Temperature Superconducting Magnet With Small Round Superconducting Cable. IEEE Transactions on Applied Superconductivity. 2026;36(5):1-5. doi:10.1109/tasc.2026.3678283

BibTeX
@article{Han2026,
  author = {Han, Zhengnan and Guan, Mingzhi and Wu, Wei and Liang, Yu and Xin, Canjie and Yang, Tongjun and Liao, Tianfa},
  title = {Research on the Design Method of Coil for the Cos-theta High-Field Low-Temperature Superconducting Magnet With Small Round Superconducting Cable},
  journal = {IEEE Transactions on Applied Superconductivity},
  year = {2026},
  volume = {36},
  number = {5},
  pages = {1--5},
  doi = {10.1109/tasc.2026.3678283}
}
Kostenlos starten →