EUVIMEDEUVIMED entdecken
Crossref

Quench Propagation Characteristic of REBCO Stacks Under Conduction-Cooled Conditions

Qing Pang, Hui Yu, Yafei Tao, Bowen Xie, Bohan Tang, Shili Jiang, Xiangyang Wu, Donghui Jiang, Guangli Kuang

IEEE Transactions on Applied Superconductivity · 2026-06 · 36 (4) · 1-9

DOI: 10.1109/tasc.2026.3677870 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-06. Verfasst von Qing Pang und 8 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key R & D Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the limited current-carrying capacity of a single high-temperature superconducting (HTS) tape, multiple tapes are often connected in parallel for high-field applications. Therefore, investigating the quench propagation characteristics of HTS stacks is crucial for ensuring the safe operation of HTS devices. Compared with liquid nitrogen immersion cooling, conduction-cooled quench tests are performed in a quasiadiabatic environment, minimizing environmental effects and allowing the results to more accurately reflect the intrinsic quench characteristics of the HTS stack. In this study, we investigate the quench propagation characteristics of REBCO stacks under conduction-cooled conditions. The stacks were fabricated using 4 mm-wide REBCO tapes, and a conduction-cooled quench test platform was built based on a GM cryocooler to perform measurements under near-adiabatic conditions. Potential taps were placed continuously along the length of the sample to monitor quench propagation, while thermocouples were attached to measure the temperature distribution. The minimum quench energy (MQE) and normal zone propagation velocity (NZPV) of the REBCO stacks were measured at ambient temperatures ranging from 60 K to 77 K. The experimental results are compared with those of a single tape sample. To verify the thermal behavior of the REBCO stack, a numerical analysis of the temperature trace was performed using the finite element method. The numerical simulation results were compared with the experimental data to verify the validity of the experimental data. The results indicate that differences in the coefficient of thermal expansion between the solder and the tapes during the cooling process led to a reduction in the critical current of the REBCO stack. As the temperature increases, both types of samples exhibit a decrease in MQE and a slowdown in NZPV. The heat absorption of the solder during quench increases the MQE of the stacked HTS tapes. Meanwhile, it also enhances the Joule heating power within the normal zone, and accelerates the NZPV.

Förderung

  • National Natural Science Foundation of China
  • National Key R & D Program of China

Zitieren

APA

Pang, Q., Yu, H., Tao, Y., Xie, B., Tang, B., Jiang, S., Wu, X., Jiang, D., & Kuang, G. (2026). Quench Propagation Characteristic of REBCO Stacks Under Conduction-Cooled Conditions. IEEE Transactions on Applied Superconductivity, 36(4), 1-9. https://doi.org/10.1109/tasc.2026.3677870

Vancouver

Pang Q, Yu H, Tao Y, Xie B, Tang B, Jiang S, et al. Quench Propagation Characteristic of REBCO Stacks Under Conduction-Cooled Conditions. IEEE Transactions on Applied Superconductivity. 2026;36(4):1-9. doi:10.1109/tasc.2026.3677870

BibTeX
@article{Pang2026,
  author = {Pang, Qing and Yu, Hui and Tao, Yafei and Xie, Bowen and Tang, Bohan and Jiang, Shili and Wu, Xiangyang and Jiang, Donghui and Kuang, Guangli},
  title = {Quench Propagation Characteristic of REBCO Stacks Under Conduction-Cooled Conditions},
  journal = {IEEE Transactions on Applied Superconductivity},
  year = {2026},
  volume = {36},
  number = {4},
  pages = {1--9},
  doi = {10.1109/tasc.2026.3677870}
}
Kostenlos starten →