EUVIMEDEUVIMED entdecken
Crossref

Quench Characteristics and Protection of the CEPC Detector Magnet

Menglin Wang, Ling Zhao, Rui Kang, Zhilong Hou, Zhongxiu Liu, Qingyuan Li, Qingjin Xu, Feipeng Ning

IEEE Transactions on Applied Superconductivity · 2026-10 · 36 (7) · 4500706-4500706

DOI: 10.1109/tasc.2026.3673668 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-10. Verfasst von Menglin Wang und 7 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The circular electron positron collider (CEPC) detector magnet is a large-scale superconducting magnet with stringent quench protection requirements. To enhance the mechanical stability of the coils, the aluminum-stabilized NbTi/Cu cable adopts a box-type structure, in which part of the outer high-purity aluminum is replaced by high-strength aluminum alloy. This modification leads to a degradation in the quench characteristics and thermal stability of the coils. This article comprehensively evaluates a protection strategy combining a 50 mΩ dump resistor with the quench-back effect provided by the support cylinder. Rapid assessment using the MIITS (integral of I2 over time) method confirmed that this configuration maintains the terminal voltage below 1 kV and limits the maximum coil temperature to 59.22 K. A detailed 3-D finite element analysis further quantified the quench behavior: the peak hotspot temperature reached 56.7 K, and the current decay time constant is 140 s, underscoring the contribution of the quench-back cylinder. The minimum quench energy is calculated to range from 16.4 J to 20 J, depending on the quench initiation location. The magnet’s intrinsic self-protecting capability is demonstrated under various fault conditions; peak temperatures remained within acceptable limits even with protection delays up to 10 s, and reached a maximum of 97.42 K only in the event of a complete protection system failure. These results validate the reliability of the quench protection design for the CEPC detector magnet.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, M., Zhao, L., Kang, R., Hou, Z., Liu, Z., Li, Q., Xu, Q., & Ning, F. (2026). Quench Characteristics and Protection of the CEPC Detector Magnet. IEEE Transactions on Applied Superconductivity, 36(7), 4500706-4500706. https://doi.org/10.1109/tasc.2026.3673668

Vancouver

Wang M, Zhao L, Kang R, Hou Z, Liu Z, Li Q, et al. Quench Characteristics and Protection of the CEPC Detector Magnet. IEEE Transactions on Applied Superconductivity. 2026;36(7):4500706-4500706. doi:10.1109/tasc.2026.3673668

BibTeX
@article{Wang2026,
  author = {Wang, Menglin and Zhao, Ling and Kang, Rui and Hou, Zhilong and Liu, Zhongxiu and Li, Qingyuan and Xu, Qingjin and Ning, Feipeng},
  title = {Quench Characteristics and Protection of the CEPC Detector Magnet},
  journal = {IEEE Transactions on Applied Superconductivity},
  year = {2026},
  volume = {36},
  number = {7},
  pages = {4500706--4500706},
  doi = {10.1109/tasc.2026.3673668}
}
Kostenlos starten →