CCAT: Flexible Stripline Circuits for Large-Format Kinetic Inductance Detector (KID) Array Readout
IEEE Transactions on Applied Superconductivity · 2026-09 · 36 (6) · 1-6
DOI: 10.1109/tasc.2026.3669460 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-09. Verfasst von Ben Keller und 15 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 11 Literaturangaben.
Abstract (Originalsprache)
The CCAT Observatory’s primary science instrument, Prime-Cam, is nearing readiness for deployment to the Fred Young Submillimeter Telescope in the Atacama Desert in northern Chile. When fully deployed, Prime-Cam will field approximately 100 000 kinetic inductance detectors (KIDs) across seven instrument modules making both broadband and polarimetric measurements. Meanwhile, in-lab characterization of the first CCAT instrument module, a 280-GHz broadband camera fielding over 10 000 KIDs, is currently underway in the test bed instrument Mod-Cam. Both Mod-Cam and Prime-Cam will employ 46-cm-long low-thermal-conductivity flexible circuits (“stripline”) between 4 and 300 K to connect large-format arrays of multiplexed KIDs in each instrument module to readout electronics. The 280-GHz camera currently installed in Mod-Cam uses six of these striplines to read out its over 10 000 detectors. We have examined the thermal and electrical performance of the stripline installed in Mod-Cam in an effort to better optimize the readout chain for deployment in Prime-Cam. We begin by characterizing the oxygen-free high thermal conductivity (OFHC) copper in the stripline traces, allowing for the estimation of thermal loading through these flexible circuits in their configurations in both Mod-Cam and Prime-Cam. We then directly measure the thermal conductivity of the stripline, finding it is best described by $kA\,=\,22\pm \text{6}\,T^{0.84\pm 0.09}\,\mathrm{\mu W{\cdot } m{\cdot } K^{-1}}$ for temperature ranges of $6\,\mathrm{K} and $kA\,=\,0.6\pm \text{0.3}\,T^{-0.4\pm 0.1}\,\mathrm{mW{\cdot } m{\cdot }K^{-1}}$ for ranges from $20\,\mathrm{K} . Following our thermal characterizations, we report on the transmission and crosstalk properties of the Mod-Cam readout chain, isolating elevated crosstalk to SMP-SMA transition printed circuit boards that interface with the stripline. This finding validates the stripline circuit as a viable high-density cabling option for large-format array readout.
Zitieren
APA
Keller, B., Freundt, R., Burgoyne, J. R., Chapman, S., Choi, S., Duell, C. J., Groppi, C., Humphreys, C., Lin, L. T., Middleton, A., Niemack, M. D., Patel, D., Vavagiakis, E., Walker, S., Wang, Y., & Xie, R. (2026). CCAT: Flexible Stripline Circuits for Large-Format Kinetic Inductance Detector (KID) Array Readout. IEEE Transactions on Applied Superconductivity, 36(6), 1-6. https://doi.org/10.1109/tasc.2026.3669460
Vancouver
Keller B, Freundt R, Burgoyne JR, Chapman S, Choi S, Duell CJ, et al. CCAT: Flexible Stripline Circuits for Large-Format Kinetic Inductance Detector (KID) Array Readout. IEEE Transactions on Applied Superconductivity. 2026;36(6):1-6. doi:10.1109/tasc.2026.3669460
BibTeX
@article{Keller2026,
author = {Keller, Ben and Freundt, Rodrigo and Burgoyne, James R. and Chapman, Scott and Choi, Steve and Duell, Cody J. and Groppi, Christopher and Humphreys, Caleb and Lin, Lawrence T. and Middleton, Alicia and Niemack, Michael D. and Patel, Darshan and Vavagiakis, Eve and Walker, Samantha and Wang, Yuhan and Xie, Ruixuan},
title = {CCAT: Flexible Stripline Circuits for Large-Format Kinetic Inductance Detector (KID) Array Readout},
journal = {IEEE Transactions on Applied Superconductivity},
year = {2026},
volume = {36},
number = {6},
pages = {1--6},
doi = {10.1109/tasc.2026.3669460}
}
EUVIMED