Fabrication of km-Class 30-Filament MgB 2 Wires by the Internal Magnesium Diffusion Method
IEEE Transactions on Applied Superconductivity · 2026-05 · 36 (3) · 1-4
DOI: 10.1109/tasc.2025.3620767 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Applied Superconductivity, 2026-05. Verfasst von Wei Xie und 10 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 14 Literaturangaben. Gefördert von: Key Program of National Natural Science Foundation of China.
Abstract (Originalsprache)
MgB 2 is one of the practical superconductors that has been widely studied over the past two decades. The internal magnesium diffusion (IMD) method serves as a promising method because it can enhance the grain connectivity of MgB 2 phase and thereby improve the superconducting current of MgB 2 wires. Here, we present the fabrication of 30-filament MgB 2 wires using the IMD method. The wires have a diameter of 1.00 mm and length more than 1 km. The filling factor of MgB 2 is around 10% and the superconducting current ${{I}_c}$ (4.2K, 3T) reaches 650 A. The highest layer-superconducting current density ${{J}_c}$ (4.2K, 3T) is 8.9 × 10 3 A mm −2 and engineering superconducting current density ${{J}_e}$ (4.2K, 3T) is 8.3 × 10 2 A mm −2 . Meanwhile, the percentage of copper in the MgB 2 wire is 28% and the residual resistivity ratio RRR(300K/40K) is 60. This can enhance the thermal stability for the low-temperature application. All of these indicate the great potential for the application of our MgB 2 wires in the future.
Förderung
- Key Program of National Natural Science Foundation of China
Zitieren
APA
Xie, W., Guo, Q., Wang, M., Yuan, W., Zhu, Y., Wu, B., Yan, G., Liu, X., Feng, Y., Li, J., & Zhang, P. (2026). Fabrication of km-Class 30-Filament MgB 2 Wires by the Internal Magnesium Diffusion Method. IEEE Transactions on Applied Superconductivity, 36(3), 1-4. https://doi.org/10.1109/tasc.2025.3620767
Vancouver
Xie W, Guo Q, Wang M, Yuan W, Zhu Y, Wu B, et al. Fabrication of km-Class 30-Filament MgB 2 Wires by the Internal Magnesium Diffusion Method. IEEE Transactions on Applied Superconductivity. 2026;36(3):1-4. doi:10.1109/tasc.2025.3620767
BibTeX
@article{Xie2026,
author = {Xie, Wei and Guo, Qiang and Wang, Mingjiang and Yuan, Wenlong and Zhu, Yanming and Wu, Bo and Yan, Guo and Liu, Xianghong and Feng, Yong and Li, Jianfeng and Zhang, Pingxiang},
title = {Fabrication of km-Class 30-Filament MgB 2 Wires by the Internal Magnesium Diffusion Method},
journal = {IEEE Transactions on Applied Superconductivity},
year = {2026},
volume = {36},
number = {3},
pages = {1--4},
doi = {10.1109/tasc.2025.3620767}
}
EUVIMED