EUVIMEDEUVIMED entdecken
Crossref

3-D-Printed Folded Transmitarray With Gain-Filtering Response and Low Cross-Polarization

Yuanxi Cao, Le Chang, Sifan Wu, Jianxing Li, Juan Chen, Sen Yan

IEEE Transactions on Antennas and Propagation · 2026-08 · 74 (8) · 8049-8054

DOI: 10.1109/tap.2026.3692666 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2026-08. Verfasst von Yuanxi Cao und 5 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Gefördert von: National Natural Science Foundation, China, Fundamental Research Funds of Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An air-filled cavity filter-based folded transmitarray antenna (FTA) is proposed in this communication. The transmitarray (TA) of FTA is realized by rectangular waveguide filters. The varied size of the coupling inductive iris between the resonators enables the filters to realize nearly the same filtering response and the 3-bit phase delay. The bottom plate of the FTA is periodically arranged with 45°-tilted parallel plate waveguides (PPWs), which can out-of-phase reflect the ±45° polarized incident waves, then achieve the polarization conversion. The main contribution of the proposed design is the utilization of transmission and reflection characteristics of rectangular waveguide-based TAs. The concept enables polarization selection in the frequency domain, achieving extremely high reflection coefficients. Moreover, the cutoff characteristic of the TA can effectively suppress the transmission of cross-polarized electromagnetic waves, resulting in a low cross-polarization level. To verify the feasibility of the design, an FTA prototype is fabricated using 3-D printing technology at the center frequency of 26.0 GHz. The measured results show that the antenna can realize the gain filtering beam with the rejection level around −20.0 dB, and the maximum aperture efficiency of 50.3%. In addition, several defocus sources are used to excite the FTA, demonstrating its multibeam capability.

Förderung

  • National Natural Science Foundation, China
  • Fundamental Research Funds of Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices

Zitieren

APA

Cao, Y., Chang, L., Wu, S., Li, J., Chen, J., & Yan, S. (2026). 3-D-Printed Folded Transmitarray With Gain-Filtering Response and Low Cross-Polarization. IEEE Transactions on Antennas and Propagation, 74(8), 8049-8054. https://doi.org/10.1109/tap.2026.3692666

Vancouver

Cao Y, Chang L, Wu S, Li J, Chen J, Yan S. 3-D-Printed Folded Transmitarray With Gain-Filtering Response and Low Cross-Polarization. IEEE Transactions on Antennas and Propagation. 2026;74(8):8049-8054. doi:10.1109/tap.2026.3692666

BibTeX
@article{Cao2026,
  author = {Cao, Yuanxi and Chang, Le and Wu, Sifan and Li, Jianxing and Chen, Juan and Yan, Sen},
  title = {3-D-Printed Folded Transmitarray With Gain-Filtering Response and Low Cross-Polarization},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2026},
  volume = {74},
  number = {8},
  pages = {8049--8054},
  doi = {10.1109/tap.2026.3692666}
}
Kostenlos starten →