EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comprehensive Methodology for Synthesis of Cylindrical Leaky Wave Metasurface Antennas

Davorin Mikulić, Thibault Boisseau, Maxime Harnois, Marko Bosiljevac, Zvonimir Šipuš

IEEE Transactions on Antennas and Propagation · 2026-07 · 74 (7) · 6159-6172

DOI: 10.1109/tap.2026.3683232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2026-07. Verfasst von Davorin Mikulić und 4 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HORIZON EUROPE EIC Pathfinder Open Program “Flexible Intelligent Near-Field Sensing Skins (FITNESS)”, European Commission, EU and the Ministry of Higher Education and Research, Brittany, via the CPER Project MAT&TRANS.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Numerous challenges are present in the design and realization of curved leaky wave metasurface (MTS) antennas, such as uncontrolled radiation of creeping waves (CWs), the requirement for amplitude and phase correction of excited leaky waves, and practical issues related to metallization of complex MTS patterns on flexible substrates. Therefore, the aim of this article is to offer a comprehensive methodology for the synthesis of such MTS antennas on cylindrical substrates, covering analytical tools, design procedure, and fabrication method. As a first step, the theoretical foundation of CW propagation and analytical methodology for extracting their properties on cylindrical MTSs is developed. Furthermore, a method for retrieving the optimal MTS reactance profile is discussed, which is needed to obtain the desired radiation properties from the curved structure. Finally, two cylindrical leaky wave antenna (LWA) designs with pencil-beam radiation patterns are developed based on the proposed methodology. The prototypes of the antennas were fabricated using a method called screen-printing, which was essential for realizing the metallization of the designed MTS patterns on a flexible low-loss substrate. The antennas are experimentally characterized, and the measured results are compared with theoretical predictions, demonstrating strong agreement and validating the effectiveness of the proposed synthesis approach.

Förderung

  • HORIZON EUROPE EIC Pathfinder Open Program “Flexible Intelligent Near-Field Sensing Skins (FITNESS)”
  • European Commission
  • EU and the Ministry of Higher Education and Research, Brittany, via the CPER Project MAT&TRANS

Zitieren

APA

Mikulić, D., Boisseau, T., Harnois, M., Bosiljevac, M., & Šipuš, Z. (2026). A Comprehensive Methodology for Synthesis of Cylindrical Leaky Wave Metasurface Antennas. IEEE Transactions on Antennas and Propagation, 74(7), 6159-6172. https://doi.org/10.1109/tap.2026.3683232

Vancouver

Mikulić D, Boisseau T, Harnois M, Bosiljevac M, Šipuš Z. A Comprehensive Methodology for Synthesis of Cylindrical Leaky Wave Metasurface Antennas. IEEE Transactions on Antennas and Propagation. 2026;74(7):6159-6172. doi:10.1109/tap.2026.3683232

BibTeX
@article{Mikuli2026,
  author = {Mikulić, Davorin and Boisseau, Thibault and Harnois, Maxime and Bosiljevac, Marko and Šipuš, Zvonimir},
  title = {A Comprehensive Methodology for Synthesis of Cylindrical Leaky Wave Metasurface Antennas},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2026},
  volume = {74},
  number = {7},
  pages = {6159--6172},
  doi = {10.1109/tap.2026.3683232}
}
Kostenlos starten →