Moiré-Based Dynamic Focal Compensation in 3-D-Printed Millimeter-Wave Scanning Lens Antennas
IEEE Transactions on Antennas and Propagation · 2026-06 · 74 (6) · 5317-5325
DOI: 10.1109/tap.2026.3676051 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2026-06. Verfasst von Yueming Lei und 8 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Natural Science Foundation of Sichuan.
Abstract (Originalsprache)
This article proposes a Moiré-based scanning lens design method with dynamic focal compensation, which is implemented and experimentally validated using a millimeter-wave near-field scanning lens antenna operating at 100 GHz and fabricated by stereolithography-based 3-D printing. To overcome the limited phase-control flexibility of conventional mechanically scanned lens systems, which often lead to focal-plane deviation at large scanning angles, the proposed method employs a cascaded phase modulation scheme realized with a pair of high-transmittance dielectric lenses. By incorporating Moiré phase modulation into a rotating lens architecture, dynamic focal compensation is intrinsically achieved during scanning, enabling 2-D near-field focal-spot steering while maintaining stable alignment with the preset scanning plane in a purely passive system. From full-wave electromagnetic simulations and experimental measurements, the proposed design is shown to preserve focal alignment over a wide range of scanning angles, including large-angle scanning conditions. The scanning loss along the $x$ -axis of the focal plane is reduced from 5.2 to 1.4 dB, and the measured sidelobe level (SLL) is suppressed below–27.5 dB, demonstrating effective near-field energy confinement. The proposed Moiré-based scanning lens design method with dynamic compensation provides a compact, low-cost, and versatile solution for millimeter-wave near-field focal scanning and offers a promising design pathway for passive lens antennas in millimeter-wave and higher-frequency regimes.
Förderung
- National Natural Science Foundation of China
- National Natural Science Foundation of Sichuan
Zitieren
APA
Lei, Y., Wu, Y., Wang, H., Duan, J., Wang, Z., Zhang, P., Lu, Z., Wang, S., & Gong, Y. (2026). Moiré-Based Dynamic Focal Compensation in 3-D-Printed Millimeter-Wave Scanning Lens Antennas. IEEE Transactions on Antennas and Propagation, 74(6), 5317-5325. https://doi.org/10.1109/tap.2026.3676051
Vancouver
Lei Y, Wu Y, Wang H, Duan J, Wang Z, Zhang P, et al. Moiré-Based Dynamic Focal Compensation in 3-D-Printed Millimeter-Wave Scanning Lens Antennas. IEEE Transactions on Antennas and Propagation. 2026;74(6):5317-5325. doi:10.1109/tap.2026.3676051
BibTeX
@article{Lei2026,
author = {Lei, Yueming and Wu, Yuchen and Wang, Huanyu and Duan, Jingrui and Wang, Zhanliang and Zhang, Ping and Lu, Zhigang and Wang, Shaomeng and Gong, Yubin},
title = {Moiré-Based Dynamic Focal Compensation in 3-D-Printed Millimeter-Wave Scanning Lens Antennas},
journal = {IEEE Transactions on Antennas and Propagation},
year = {2026},
volume = {74},
number = {6},
pages = {5317--5325},
doi = {10.1109/tap.2026.3676051}
}
EUVIMED