EUVIMEDEUVIMED entdecken
Crossref

Achieving Wireless Cable Testing for MIMO Devices With a Novel Condition Number Reduction Method

Heng Wang, Jianhua Zhang, Zhenyun Hu, Zhanpeng Zhang, Lei Tian, Kai Niu, Feilong Wang, Xiang Zhang

IEEE Transactions on Antennas and Propagation · 2025-12 · 73 (12) · 10613-10623

DOI: 10.1109/tap.2025.3618761 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2025-12. Verfasst von Heng Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Science Fund for Distinguished Young Scholars, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wireless cable is a promising solution for testing highly integrated multiple-input multiple-output (MIMO) devices in an over-the-air (OTA) manner. It has attracted significant attention from academia, industry, and standardization bodies. By measuring and calibrating the transfer matrix between the device under test (DUT) antenna ports and probe antennas, wireless cables, i.e., OTA direct links, can be established between the probe antennas and the corresponding DUT antenna ports, thereby enabling conductive cabled testing functionality. However, achieving high-quality wireless cables requires a transfer matrix with a small condition number. Otherwise, implementation errors in the measurement setup can be significantly amplified, degrading the quality (isolation level) of the realized wireless cables. For this issue, this article proposes a novel condition number reduction method for wireless cable connections. By employing the precoding matrix, a new composite coupling matrix with a small condition number can be generated and used for constructing high-quality wireless cables. Different from existing methods that require random mechanical movement of DUT or brute-force probe selection, the proposed method can be explicitly performed based on the obtained ill-conditioned transfer matrix, saving measurement time. The proposed method is validated through Monte Carlo simulations and experimental measurements. Excellent isolation levels of above 22 dB are achieved in two different measurement scenarios, demonstrating the effectiveness and robustness of this solution.

Förderung

  • National Key Research and Development Program of China
  • National Science Fund for Distinguished Young Scholars
  • National Natural Science Foundation of China
  • BUPT–CMCC Joint Institute
  • Postdoctoral Fellowship Program of China Postdoctoral Science Foundation

Zitieren

APA

Wang, H., Zhang, J., Hu, Z., Zhang, Z., Tian, L., Niu, K., Wang, F., & Zhang, X. (2025). Achieving Wireless Cable Testing for MIMO Devices With a Novel Condition Number Reduction Method. IEEE Transactions on Antennas and Propagation, 73(12), 10613-10623. https://doi.org/10.1109/tap.2025.3618761

Vancouver

Wang H, Zhang J, Hu Z, Zhang Z, Tian L, Niu K, et al. Achieving Wireless Cable Testing for MIMO Devices With a Novel Condition Number Reduction Method. IEEE Transactions on Antennas and Propagation. 2025;73(12):10613-10623. doi:10.1109/tap.2025.3618761

BibTeX
@article{Wang2025,
  author = {Wang, Heng and Zhang, Jianhua and Hu, Zhenyun and Zhang, Zhanpeng and Tian, Lei and Niu, Kai and Wang, Feilong and Zhang, Xiang},
  title = {Achieving Wireless Cable Testing for MIMO Devices With a Novel Condition Number Reduction Method},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2025},
  volume = {73},
  number = {12},
  pages = {10613--10623},
  doi = {10.1109/tap.2025.3618761}
}
Kostenlos starten →