3-D-Printed mm-Wave Filtering Magnetoelectric Dipole Antenna With Wide Beamwidth and Its Application in High-Isolation E-Plane Phased Arrays
IEEE Transactions on Antennas and Propagation · 2025-02 · 73 (2) · 807-819
DOI: 10.1109/tap.2024.3487011 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2025-02. Verfasst von Taotao Huang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, International Cooperation Funds of Shanxi Province, Shaanxi Key Laboratory.
Abstract (Originalsprache)
In this article, a 3-D-printed filtering magnetoelectric (ME) dipole antenna with wide beamwidth and its high-isolation E-plane phased arrays for mm-wave applications are presented. This antenna element consists of a fourth-order cross-coupling cavity feeding scheme and an ME dipole radiator with a pair of vertical electric walls, which enables both a filtering response with two radiation nulls and a wide beam. The operating principle of the filtering function and the beam shaping are analyzed in detail. Compared with traditional waveguide aperture filtering antennas, the proposed ME dipole effectively widens the beamwidth without obviously increasing the E-plane size. Subsequently, a four-unit E-plane linear phased array is constructed based on the filtering wide-beam ME dipole. The vertical electric walls of the ME dipole also act as the decoupling walls for the array and can be utilized to enhance the isolation of adjacent antenna ports. Finally, to verify the concept, the antenna element and phased array are fabricated using selective laser melting (SLM) 3-D-printing technology. The measured half-power beamwidth (HPBW) of the filtering ME dipole is 139° in the E-plane. As a result, the array achieves a measured scanning angle of ±50° with a gain fluctuation of less than 1.9 dB over the operating band, and the isolations are better than 25.5 dB. More importantly, the filtering function is simultaneously integrated into the phased array antenna to enhance the out-of-band rejection capability.
Förderung
- National Natural Science Foundation of China
- International Cooperation Funds of Shanxi Province
- Shaanxi Key Laboratory
- Shaanxi Science and Technology Innovation Team (S&T) Innovation Team
- Hunan Province Innovation Platform and Talent Plan Project
Zitieren
APA
Huang, T., Liu, H., Xu, H., & Geng, L. (2025). 3-D-Printed mm-Wave Filtering Magnetoelectric Dipole Antenna With Wide Beamwidth and Its Application in High-Isolation E-Plane Phased Arrays. IEEE Transactions on Antennas and Propagation, 73(2), 807-819. https://doi.org/10.1109/tap.2024.3487011
Vancouver
Huang T, Liu H, Xu H, Geng L. 3-D-Printed mm-Wave Filtering Magnetoelectric Dipole Antenna With Wide Beamwidth and Its Application in High-Isolation E-Plane Phased Arrays. IEEE Transactions on Antennas and Propagation. 2025;73(2):807-819. doi:10.1109/tap.2024.3487011
BibTeX
@article{Huang2025,
author = {Huang, Taotao and Liu, Haiwen and Xu, Hao and Geng, Li},
title = {3-D-Printed mm-Wave Filtering Magnetoelectric Dipole Antenna With Wide Beamwidth and Its Application in High-Isolation E-Plane Phased Arrays},
journal = {IEEE Transactions on Antennas and Propagation},
year = {2025},
volume = {73},
number = {2},
pages = {807--819},
doi = {10.1109/tap.2024.3487011}
}
EUVIMED