EUVIMEDEUVIMED entdecken
Crossref

A 3-D-Printed Broadband Wide-Angle Multibeam Flat GRIN Lens Aided by Multifocal Ray-Path Analyses

Li-Zhao Song, Yun-Ze Diao, Pei-Yuan Qin, Maral Ansari, Jeff von Loesecke, Stefano Maci, Y. Jay Guo

IEEE Transactions on Antennas and Propagation · 2025-01 · 73 (1) · 22-32

DOI: 10.1109/tap.2024.3444316 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2025-01. Verfasst von Li-Zhao Song und 6 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: Australia Research Council Discovery Program, Italian Ministry of Research Project of Research of National Interest on Metasurface Antennas.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An analysis of actual optical ray paths in flat gradient-index (GRIN) lenses for multifocal multibeam radiations is introduced in this article. The formulation is rigorously established using the conservation of momentum applied to an offset focal point for the extreme beam generation. Assisted by the above analysis, a new lens design approach for GRIN profile synthesis is proposed with two extreme focal points and then extended to determine a convenient locus of feed that allows for covering the scanning range with minimal overall aperture phase errors. The ray-path errors have been tested and compared with those of previously reported multibeam GRIN lenses, which were based on a straight, parallel ray-path assumption inside the lens. The superiority and generality of the new design formulas have been proven by comparing lens prototypes from the two different methods. It is demonstrated that the proposed one can enable consistent gain enhancement for multiple beams at different operating frequencies. Finally, the new design method has been validated by implementing an all-dielectric 3-D-printed seven-beam flat GRIN lens. A wide beam coverage of ±44° has been realized with measured scanning losses between 1.2 and 2.93 dB at different frequencies. The measured 3-dB gain bandwidth is 42.8% covering 12.3–19 GHz.

Förderung

  • Australia Research Council Discovery Program
  • Italian Ministry of Research Project of Research of National Interest on Metasurface Antennas

Zitieren

APA

Song, L., Diao, Y., Qin, P., Ansari, M., Loesecke, J. V., Maci, S., & Guo, Y. J. (2025). A 3-D-Printed Broadband Wide-Angle Multibeam Flat GRIN Lens Aided by Multifocal Ray-Path Analyses. IEEE Transactions on Antennas and Propagation, 73(1), 22-32. https://doi.org/10.1109/tap.2024.3444316

Vancouver

Song L, Diao Y, Qin P, Ansari M, Loesecke JV, Maci S, et al. A 3-D-Printed Broadband Wide-Angle Multibeam Flat GRIN Lens Aided by Multifocal Ray-Path Analyses. IEEE Transactions on Antennas and Propagation. 2025;73(1):22-32. doi:10.1109/tap.2024.3444316

BibTeX
@article{Song2025,
  author = {Song, Li-Zhao and Diao, Yun-Ze and Qin, Pei-Yuan and Ansari, Maral and Loesecke, Jeff von and Maci, Stefano and Guo, Y. Jay},
  title = {A 3-D-Printed Broadband Wide-Angle Multibeam Flat GRIN Lens Aided by Multifocal Ray-Path Analyses},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2025},
  volume = {73},
  number = {1},
  pages = {22--32},
  doi = {10.1109/tap.2024.3444316}
}
Kostenlos starten →