EUVIMEDEUVIMED entdecken
Crossref

Wideband Fixed-Beam Single-Piece Leaky Wave Antenna With Controlled Dispersion Slope

Shu-Lin Chen, Li-Zhao Song, Debabrata K. Karmokar, Bevan Jones, Y. Jay Guo

IEEE Transactions on Antennas and Propagation · 2023-11 · 71 (11) · 8429-8440

DOI: 10.1109/tap.2023.3310005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2023-11. Verfasst von Shu-Lin Chen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: 2022 IEEE Antennas and Propagation Society Fellowship Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Leaky wave antennas (LWAs) have been widely investigated for wireless systems because of their simple feed, low profile, and easy integration. They typically have a dispersive traveling wave leading to beam squinting behavior, which can significantly decrease the useful operating bandwidth in point-to-point communications. An innovative method that avoids beam squint with frequency over a wide band is developed in this work using a negative dispersion slope. By integrating a baffle of square bracket-shaped metal pieces into a transverse-slot LWA, the main beam angle is almost fixed at an angle, $\theta = 37^{\circ } \pm 2^{\circ }$ , across a wide frequency band from 9.5 to 12.2 GHz. The wide bandwidth is a consequence of the negative dispersion slope produced by the interaction between the baffle and the slotted waveguide. In the $\theta = 37^{\circ }$ direction, the gain variation is less than 3 dB across this band. Equivalent circuit analysis and full-wave modeling are presented to demonstrate the negative-slope dispersion diagram. The obtained 3-dB gain curve exhibits a filter characteristic. In addition, the bandwidth can be chosen by a suitable selection of parameters. It is the first time that these desirable features have been reported for wideband fixed-beam LWAs. The final antenna was fabricated with a low-cost additive manufacturing (3-D printing) technology. The measured results agree well with the simulated ones and verify the effectiveness of the antennas developed in this way.

Förderung

  • 2022 IEEE Antennas and Propagation Society Fellowship Program

Zitieren

APA

Chen, S., Song, L., Karmokar, D. K., Jones, B., & Guo, Y. J. (2023). Wideband Fixed-Beam Single-Piece Leaky Wave Antenna With Controlled Dispersion Slope. IEEE Transactions on Antennas and Propagation, 71(11), 8429-8440. https://doi.org/10.1109/tap.2023.3310005

Vancouver

Chen S, Song L, Karmokar DK, Jones B, Guo YJ. Wideband Fixed-Beam Single-Piece Leaky Wave Antenna With Controlled Dispersion Slope. IEEE Transactions on Antennas and Propagation. 2023;71(11):8429-8440. doi:10.1109/tap.2023.3310005

BibTeX
@article{Chen2023,
  author = {Chen, Shu-Lin and Song, Li-Zhao and Karmokar, Debabrata K. and Jones, Bevan and Guo, Y. Jay},
  title = {Wideband Fixed-Beam Single-Piece Leaky Wave Antenna With Controlled Dispersion Slope},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2023},
  volume = {71},
  number = {11},
  pages = {8429--8440},
  doi = {10.1109/tap.2023.3310005}
}
Kostenlos starten →