Scalability Behaviors on Metrics and Electrochemical Impedance Parameters for Different Heavy-Duty EV Battery Cell Sizes
IEEE Open Journal of Vehicular Technology · 2026 · 7 · 2109-2121
DOI: 10.1109/ojvt.2026.3708962 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Open Journal of Vehicular Technology, 2026. Verfasst von Van Cay Nguyen und 5 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: French National Research Agency, France 2030 Réussir l'Efficience des Mobilits d'Excellence Décarbonées.
Abstract (Originalsprache)
When designing a battery pack, the integrator can choose between different cell sizes within the same technology and from the same manufacturer catalog. In this study, cell size is defined in terms of rated capacity. The objective of this paper is to investigate to what extent scalability behaviors can be established as a function of battery cell size. In this paper, five large-format prismatic Lithium iron Phosphate (LFP) cells with different rated capacities (54 Ah, 125 Ah, 163 Ah, 230 Ah, and 314 Ah) from the same manufacturer are considered. Insights on their chemical constitution are given. The cells from 54 Ah to 230 Ah can be considered to have identical compositions. The 314 Ah cell is similar but exhibits slight differences in electrolyte formulation, including the addition of 6.5% additive to improve lifetime. All cells are intended for use in Heavy-Duty Electric Vehicles (HDEVs). Both cell metrics, volume and mass, as well as impedance parameters are studied. Identical test conditions are applied to evaluate the influence of cell size on Electrochemical Impedance Spectroscopy (EIS) parameters. All measurements are performed at 30% SOC and 24 °C in order to isolate the influence of cell size on the impedance parameters. The cells are modeled using an Equivalent Circuit Model (ECM) consisting of an inductance, ohmic resistance, charge transfer resistance, double-layer capacitance, and a Warburg element representing ion diffusion. Impedance parameters identification is conducted via data fitting with EIS test results. The results show that for every cell, the capacity has a proportional impact on the volume and mass of the cells. The ohmic resistance is also inversely linear to the capacity. For the 54 Ah–230 Ah cells, the charge-transfer resistance decreases with increasing capacity, the double-layer capacitance increases proportionally with capacity, and the Warburg-related parameter exhibits a decreasing tendency, although with a larger dispersion. Nevertheless, the slight difference in the chemical constitution of the 314 Ah cell is associated with significant deviations from the identified scalability behaviors. No clear scalability behavior is possible for the inductance, which is a parasitic element in the 10−8 H order of magnitude.
Förderung
- French National Research Agency
- France 2030 Réussir l'Efficience des Mobilits d'Excellence Décarbonées
Zitieren
APA
Nguyen, V. C., German, R., Sari, A., Lhomme, W., Hijazi, A., & Morel, L. (2026). Scalability Behaviors on Metrics and Electrochemical Impedance Parameters for Different Heavy-Duty EV Battery Cell Sizes. IEEE Open Journal of Vehicular Technology, 7, 2109-2121. https://doi.org/10.1109/ojvt.2026.3708962
Vancouver
Nguyen VC, German R, Sari A, Lhomme W, Hijazi A, Morel L. Scalability Behaviors on Metrics and Electrochemical Impedance Parameters for Different Heavy-Duty EV Battery Cell Sizes. IEEE Open Journal of Vehicular Technology. 2026;7:2109-2121. doi:10.1109/ojvt.2026.3708962
BibTeX
@article{Nguyen2026,
author = {Nguyen, Van Cay and German, Ronan and Sari, Ali and Lhomme, Walter and Hijazi, Alaa and Morel, Laurent},
title = {Scalability Behaviors on Metrics and Electrochemical Impedance Parameters for Different Heavy-Duty EV Battery Cell Sizes},
journal = {IEEE Open Journal of Vehicular Technology},
year = {2026},
volume = {7},
pages = {2109--2121},
doi = {10.1109/ojvt.2026.3708962}
}
EUVIMED