LR-FHSS Transceiver for Direct-to-Satellite IoT Communications: Design, Implementation, and Verification
IEEE Open Journal of Vehicular Technology · 2025 · 6 · 1920-1942
DOI: 10.1109/ojvt.2025.3585160 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Open Journal of Vehicular Technology, 2025. Verfasst von Sooyeob Jung und 7 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Electronics and Telecommunications Research Institute funded by the Korean Government, National Research Foundation of Korea, Korea Government.
Abstract (Originalsprache)
This paper proposes a long range-frequency hopping spread spectrum (LR-FHSS) transceiver design for the Direct-to-Satellite Internet of Things (DtS-IoT) communication system. The DtS-IoT system has recently attracted attention as a promising non-terrestrial network (NTN) solution to provide high-traffic and delay-tolerant data transfer services, such as wide-area situational awareness (WASA) in smart grids and car share management in automotive applications, to IoT devices in global coverage. In particular, this study provides guidelines for the overall DtS-IoT system architecture and design details that conform to the Long Range Wide-Area Network (LoRaWAN). Furthermore, we also detail various DtS-IoT use cases. Considering low-Earth orbit (LEO) satellites, we develop the LR-FHSS transceiver to improve system efficiency, which is a leading attempt to build practical satellite communication systems using LR-FHSS, excluding commercial products. Moreover, we apply a robust synchronization scheme against the Doppler effect and co-channel interference (CCI) caused by LEO satellite channel environments, including signal detection for the simultaneous reception of numerous frequency hopping signals and an enhanced soft-output-Viterbi-algorithm (SOVA) for the header and payload receptions. Lastly, we present proof-of-concept implementation and testbeds using an application-specific integrated circuit (ASIC) chipset and a field-programmable gate array (FPGA) that verify the performance of the proposed LR-FHSS transceiver design of DtS-IoT communication systems. The laboratory test results reveal that the proposed LR-FHSS-based framework with the robust synchronization technique can provide wide coverage, seamless connectivity, and high-throughput communication links for the realization of future satellite communication networks.
Förderung
- Electronics and Telecommunications Research Institute funded by the Korean Government
- National Research Foundation of Korea
- Korea Government
- Ministry of Science and ICT, South Korea
- Institute of Information and Communications Technology Planning and Evaluation
- Information Technology Research Center
Zitieren
APA
Jung, S., Jeong, S., Kang, J., Im, G., Lee, S., Oh, M., Ryu, J. G., & Kang, J. (2025). LR-FHSS Transceiver for Direct-to-Satellite IoT Communications: Design, Implementation, and Verification. IEEE Open Journal of Vehicular Technology, 6, 1920-1942. https://doi.org/10.1109/ojvt.2025.3585160
Vancouver
Jung S, Jeong S, Kang J, Im G, Lee S, Oh M, et al. LR-FHSS Transceiver for Direct-to-Satellite IoT Communications: Design, Implementation, and Verification. IEEE Open Journal of Vehicular Technology. 2025;6:1920-1942. doi:10.1109/ojvt.2025.3585160
BibTeX
@article{Jung2025,
author = {Jung, Sooyeob and Jeong, Seongah and Kang, Jinkyu and Im, Gyeongrae and Lee, Sangjae and Oh, Mi-Kyung and Ryu, Joon Gyu and Kang, Joonhyuk},
title = {LR-FHSS Transceiver for Direct-to-Satellite IoT Communications: Design, Implementation, and Verification},
journal = {IEEE Open Journal of Vehicular Technology},
year = {2025},
volume = {6},
pages = {1920--1942},
doi = {10.1109/ojvt.2025.3585160}
}
EUVIMED