EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Chip-Type Sensors for Die-Casting Process Monitoring

Mako Tanaka, Yoshihito Kawamura, Shinobu Satonaka, Makiko Kobayashi

IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control · 2026 · 6 · 137-143

DOI: 10.1109/ojuffc.2026.3692447 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control, 2026. Verfasst von Mako Tanaka und 3 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MRC Joint Usage/Research Grant of the Magnesium Research Center (MRC), Kumamoto University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demand for light metals has been increasing in an effort to achieve a decarbonized society. Die casting is widely used for processing light metals; however, it has the problem of low yield. In this study, we propose a chip-type sensor that can be attached to a die to diagnose defective products during the die casting process. Unlike buffer-rod type sensors, the chip-type sensor can be mounted in a minimally invasive manner without couplant. In this experiment, a chip-type sensor attached to a temporary mold was heated to $400~^{\circ }$ C, the highest temperature attainable on the mold surface, by die-casting a light metal, and then cooled to room temperature. The results showed that the chip-type sensor received larger reflected waves from the mold bottom at $400~^{\circ }$ C and room temperature after cooling, and that the ultrasonic transmission increased at the interface with the mold. This study shows that the chip sensor is an innovative sensor with excellent high-temperature characteristics.

Förderung

  • MRC Joint Usage/Research Grant of the Magnesium Research Center (MRC), Kumamoto University

Zitieren

APA

Tanaka, M., Kawamura, Y., Satonaka, S., & Kobayashi, M. (2026). Chip-Type Sensors for Die-Casting Process Monitoring. IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control, 6, 137-143. https://doi.org/10.1109/ojuffc.2026.3692447

Vancouver

Tanaka M, Kawamura Y, Satonaka S, Kobayashi M. Chip-Type Sensors for Die-Casting Process Monitoring. IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control. 2026;6:137-143. doi:10.1109/ojuffc.2026.3692447

BibTeX
@article{Tanaka2026,
  author = {Tanaka, Mako and Kawamura, Yoshihito and Satonaka, Shinobu and Kobayashi, Makiko},
  title = {Chip-Type Sensors for Die-Casting Process Monitoring},
  journal = {IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control},
  year = {2026},
  volume = {6},
  pages = {137--143},
  doi = {10.1109/ojuffc.2026.3692447}
}
Kostenlos starten →