EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Cauer-Foster Integrated Thermal Network Model for Multi-Chip SiC Power Modules Considering Temperature-Dependent Material Properties

Shuoyu Ye, Jingyang Hu, Guofu Chen, Chushan Li, Haoze Luo, Wuhua Li, Xiangning He, Francesco Iannuzzo

IEEE Open Journal of Power Electronics · 2026 · 7 · 1865-1877

DOI: 10.1109/ojpel.2026.3699397 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Open Journal of Power Electronics, 2026. Verfasst von Shuoyu Ye und 7 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Zhejiang Provincial Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a thermal network model (TNM) for multi-chip silicon carbide (SiC) power modules, which effectively incorporates temperature-dependent material properties and thermal cross-coupling (TCC) effects among parallel chips. The model adopts a hybrid three-dimensional (3-D) structure, combining a Cauer network for internal layer-wise heat conduction with a Foster network for external dissipation paths, enabling accurate and efficient electro-thermal simulations. A systematic parameter identification method is developed, leveraging finite element method (FEM) simulations to extract thermal conductance and thermal capacitance parameters through non-negative least-squares optimization and transient response fitting, with the temperature dependence of material properties fully considered. Steady-state and transient validations against FEM results show excellent consistency under different power loss levels and boundary conditions. For experimental validation, a dedicated test bench for SiC module junction temperature measurement is built, combining fiber-optic temperature sensing and thermal imaging techniques. The slight experimental deviations with a maximum error of less than 2.5 °C demonstrate that the model can accurately track the measured transient junction temperature of the module.

Förderung

  • National Natural Science Foundation of China
  • Zhejiang Provincial Natural Science Foundation of China

Zitieren

APA

Ye, S., Hu, J., Chen, G., Li, C., Luo, H., Li, W., He, X., & Iannuzzo, F. (2026). A Cauer-Foster Integrated Thermal Network Model for Multi-Chip SiC Power Modules Considering Temperature-Dependent Material Properties. IEEE Open Journal of Power Electronics, 7, 1865-1877. https://doi.org/10.1109/ojpel.2026.3699397

Vancouver

Ye S, Hu J, Chen G, Li C, Luo H, Li W, et al. A Cauer-Foster Integrated Thermal Network Model for Multi-Chip SiC Power Modules Considering Temperature-Dependent Material Properties. IEEE Open Journal of Power Electronics. 2026;7:1865-1877. doi:10.1109/ojpel.2026.3699397

BibTeX
@article{Ye2026,
  author = {Ye, Shuoyu and Hu, Jingyang and Chen, Guofu and Li, Chushan and Luo, Haoze and Li, Wuhua and He, Xiangning and Iannuzzo, Francesco},
  title = {A Cauer-Foster Integrated Thermal Network Model for Multi-Chip SiC Power Modules Considering Temperature-Dependent Material Properties},
  journal = {IEEE Open Journal of Power Electronics},
  year = {2026},
  volume = {7},
  pages = {1865--1877},
  doi = {10.1109/ojpel.2026.3699397}
}
Kostenlos starten →