Hardware-Free Parameters Derivation of the Rapp Model for Accurate High-Power Amplifier Modeling in Energy-Efficient Multicarrier Systems
IEEE Open Journal of the Communications Society · 2026 · 7 · 4885-4898
DOI: 10.1109/ojcoms.2026.3683027 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Open Journal of the Communications Society, 2026. Verfasst von Cristhian Castro-Peñaherrera und 1 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish National Projects, European Union.
Abstract (Originalsprache)
In energy-efficient multicarrier wireless systems, high-power amplifiers (HPAs) are driven close to saturation, thereby inducing severe nonlinear distortion that degrades performance. To overcome it, an accurate modeling of the HPA is crucial. Although behavioral models with memory effects provide an accurate adjustment, they require expensive laboratory equipment, that is especially challenging at high frequencies as mmWave or sub-THz. Moreover, a large number of parameters is required, becoming computationally expensive. In contrast, memoryless models offer a feasible balance between reliability and complexity for system-level simulations. Additionally, their parameters can be derived in a hardware-free approach with specifications from manufacturers. Among them, Rapp model exhibits satisfactory performance, particularly under conditions of strong compression. However, a procedure to calculate its parameters from manufacturing specifications was missing. Reported works for cubic polynomial and Saleh models already extract the parameters from specifications of data sheets, but they exhibit a worse behavior in strong compression scenarios. This paper presents a hardware-free method to calculate the Rapp parameters based on the nonlinear data obtained from the HPA manufacturer’s data sheets. The calculation process takes advantage of the Rapp function and a cubic polynomial model. By minimizing the error between both functions, the Rapp parameters are adjusted based on manufacturing parameters. The results have been evaluated through simulations and a comparison of the error between the Rapp model and two real amplifiers, namely class AB and Doherty, has been carried out. It has been proven the accuracy of the proposal to model real amplifiers with available data sheets.
Förderung
- Spanish National Projects
- European Union
Zitieren
APA
Castro-Peñaherrera, C., & García, M. J. F. (2026). Hardware-Free Parameters Derivation of the Rapp Model for Accurate High-Power Amplifier Modeling in Energy-Efficient Multicarrier Systems. IEEE Open Journal of the Communications Society, 7, 4885-4898. https://doi.org/10.1109/ojcoms.2026.3683027
Vancouver
Castro-Peñaherrera C, García MJF. Hardware-Free Parameters Derivation of the Rapp Model for Accurate High-Power Amplifier Modeling in Energy-Efficient Multicarrier Systems. IEEE Open Journal of the Communications Society. 2026;7:4885-4898. doi:10.1109/ojcoms.2026.3683027
BibTeX
@article{CastroPeaherrera2026,
author = {Castro-Peñaherrera, Cristhian and García, M. Julia Fernández-Getino},
title = {Hardware-Free Parameters Derivation of the Rapp Model for Accurate High-Power Amplifier Modeling in Energy-Efficient Multicarrier Systems},
journal = {IEEE Open Journal of the Communications Society},
year = {2026},
volume = {7},
pages = {4885--4898},
doi = {10.1109/ojcoms.2026.3683027}
}
EUVIMED