Characterization of Indoor Reconfigurable Intelligent Surface-Assisted Channels at 304 GHz: Experimental Measurements, Challenges, and Future Directions
IEEE Vehicular Technology Magazine · 2025-09 · 20 (3) · 20-29
DOI: 10.1109/mvt.2025.3582403 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Vehicular Technology Magazine, 2025-09. Verfasst von George C. Alexandropoulos und 9 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 15 Literaturangaben. Gefördert von: Horizon Europe Research and Innovation Programme.
Abstract (Originalsprache)
Reconfigurable intelligent surfaces (RISs) are expected to play a pivotal role in future indoor ultra high data rate wireless communications as well as highly accurate three-dimensional localization and sensing, mainly due to their capability to provide flexible, cost- and power-efficient coverage extension, even under blockage conditions. However, when considering beyond millimeter wave frequencies where there exists GHz-level available bandwidth, realistic models of indoor RIS-parameterized channels verified by field-trial measurements are unavailable. In this article, we first present and characterize three RIS prototypes with ${100}\times{100}$ unit cells of half-wavelength intercell spacing, which were optimized to offer a specific nonspecular reflection with 1-, 2-, and 3-bit phase quantization at 304 GHz. The designed static RISs were considered in an indoor channel measurement campaign carried out with a 304 GHz channel sounder. Channel measurements for two setups, one focusing on the transmitter-RIS-receiver path gain and the other on the angular spread of multipath components, are presented and compared with both state-of-the-art theoretical models as well as full-wave simulation results. The article is concluded with a list of challenges and research directions for RIS design and modeling of RIS-parameterized channels at THz frequencies.
Förderung
- Horizon Europe Research and Innovation Programme
Zitieren
APA
Alexandropoulos, G. C., Jung, B. K., Gavriilidis, P., Matos, S., Loeser, L. H., Elesina, V., Clemente, A., D’Errico, R., Pessoa, L. M., & Kürner, T. (2025). Characterization of Indoor Reconfigurable Intelligent Surface-Assisted Channels at 304 GHz: Experimental Measurements, Challenges, and Future Directions. IEEE Vehicular Technology Magazine, 20(3), 20-29. https://doi.org/10.1109/mvt.2025.3582403
Vancouver
Alexandropoulos GC, Jung BK, Gavriilidis P, Matos S, Loeser LH, Elesina V, et al. Characterization of Indoor Reconfigurable Intelligent Surface-Assisted Channels at 304 GHz: Experimental Measurements, Challenges, and Future Directions. IEEE Vehicular Technology Magazine. 2025;20(3):20-29. doi:10.1109/mvt.2025.3582403
BibTeX
@article{Alexandropoulos2025,
author = {Alexandropoulos, George C. and Jung, Bo Kum and Gavriilidis, Panagiotis and Matos, Sérgio and Loeser, Lorenz H.W. and Elesina, Varvara and Clemente, Antonio and D’Errico, Raffaele and Pessoa, Luís M. and Kürner, Thomas},
title = {Characterization of Indoor Reconfigurable Intelligent Surface-Assisted Channels at 304 GHz: Experimental Measurements, Challenges, and Future Directions},
journal = {IEEE Vehicular Technology Magazine},
year = {2025},
volume = {20},
number = {3},
pages = {20--29},
doi = {10.1109/mvt.2025.3582403}
}
EUVIMED