EUVIMEDEUVIMED entdecken
Crossref

2026 Roadmap for Ultrawide-Bandgap β -Ga 2 O 3 Semiconductors: From Melt-Grown Materials to High-Voltage Power Devices

Tian-Li Wu, Ta-Shun Chou

IEEE Electron Devices Magazine · 2026-06 · 4 (2) · 35-41

DOI: 10.1109/med.2026.3707419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Electron Devices Magazine, 2026-06. Verfasst von Tian-Li Wu und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: National Science and Technology Council, European Community.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The global transition toward electrification demands power electronics beyond the practical limits of silicon. SiC and GaN partially address this challenge but remain constrained in ultra-high-voltage applications by their modest bandgaps (3.3–3.4 eV), medium critical electric fields (3.0–3.3MV/cm), and costly substrate technologies. β-Ga2O3, an ultra-wide-bandgap semiconductor, offers a bandgap of 4.5–4.9 eV, a predicted critical electric field approaching 8 MV/cm, and–uniquely among UWBG semiconductors–scalable melt-grown native substrates enabled by Czochralski and EFG techniques. The first single-crystal β-Ga2O3 transistor demonstrated in 2012 initiated rapid progress toward multi-kilovolt device technologies. Rather than emphasizing record-performance benchmarking alone, this review focuses on design-relevant insights and the material–device–system couplings that define the practical roadmap for β-Ga2O3 ultra-high-voltage power electronics. The growing reliance on renewable energy generation, electric vehicles, and high-voltage DC transmission has placed unprecedented demands on power semiconductor switches. Devices that can block thousands of volts while losing minimal energy during conduction and switching translate directly into smaller, lighter, and more efficient converters. Silicon carbide (SiC) and gallium nitride (GaN) have established themselves as the workhorse wide-bandgap technologies of the past decade, with mature 1.2 kV–3.3 kV product lines. Applications that demand blocking voltages well above 10 kV–including pulsed-power systems, grid-scale converters, and solid-state transformers?remain underserved. β-Ga2O3 enters this picture not as a universal replacement for SiC or GaN, but as a complementary UWBG candidate whose unique combination of intrinsic breakdown strength and scalable native-substrate growth opens design space that neither incumbent can easily reach. Although β-Ga2O3 was first investigated as a structural oxide in the 1950s, the modern power-device era began only in 2012, when the first single-crystal Ga2O3 field-effect transistor was reported. Within roughly a decade, the field has advanced from 200 V proof-of-concept devices to multi-kilovolt vertical diodes and the first prototype Ga2O3 power converter. This pace–comparable to the early development of SiC in the late 1990s and GaN in the late 2000s–justifies the level of attention the material now receives, while also setting realistic expectations: commercialization at SiC- or GaN-equivalent scale is still years away.

Förderung

  • National Science and Technology Council
  • European Community

Zitieren

APA

Wu, T., & Chou, T. (2026). 2026 Roadmap for Ultrawide-Bandgap β -Ga 2 O 3 Semiconductors: From Melt-Grown Materials to High-Voltage Power Devices. IEEE Electron Devices Magazine, 4(2), 35-41. https://doi.org/10.1109/med.2026.3707419

Vancouver

Wu T, Chou T. 2026 Roadmap for Ultrawide-Bandgap β -Ga 2 O 3 Semiconductors: From Melt-Grown Materials to High-Voltage Power Devices. IEEE Electron Devices Magazine. 2026;4(2):35-41. doi:10.1109/med.2026.3707419

BibTeX
@article{Wu2026,
  author = {Wu, Tian-Li and Chou, Ta-Shun},
  title = {2026 Roadmap for Ultrawide-Bandgap β -Ga 2 O 3 Semiconductors: From Melt-Grown Materials to High-Voltage Power Devices},
  journal = {IEEE Electron Devices Magazine},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {35--41},
  doi = {10.1109/med.2026.3707419}
}
Kostenlos starten →