Fabrication of UTC-PDs Having High RF Power Output Efficiency
IEEE Photonics Technology Letters · 01.09.2024 · 36 (17) · 1045-1048
DOI: 10.1109/lpt.2024.3427723 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Photonics Technology Letters, erschienen am 01.09.2024. Verfasst von Qi Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 14 Literaturangaben.
Abstract (Originalsprache)
In this letter, we report the fabrication of Uni-travelling-carrier photodiode (UTC-PDs) for mm-wave applications. For the fabricated PDs, the area of the p electrode is smaller than that of the absorption area. Though this leads to a response roll off when the frequency is below 3.5 GHz, a higher impedance of the PD can be obtained, which leads to a higher RF power output for a $50~\Omega $ load resistance. For the PD having $50\times 4~\mu $ m2 absorption area and $46\times 2.5~\mu $ m2 p electrode area, the measured RF output power at 6 mA photocurrent, −2V bias and 15 GHz is 0.2 dBm. The ideal RF output power for a PD at this current is 0.35 dBm, which is only 0.15 dB higher than the measured RF power, indicating a high RF power output efficiency.
Zitieren
APA
Li, Q., Zhou, X., Li, H., Liu, Z., Xiu, T., Yao, Y., & Liang, S. (2024). Fabrication of UTC-PDs Having High RF Power Output Efficiency. IEEE Photonics Technology Letters, 36(17), 1045-1048. https://doi.org/10.1109/lpt.2024.3427723
Vancouver
Li Q, Zhou X, Li H, Liu Z, Xiu T, Yao Y, et al. Fabrication of UTC-PDs Having High RF Power Output Efficiency. IEEE Photonics Technology Letters. 2024;36(17):1045-1048. doi:10.1109/lpt.2024.3427723
BibTeX
@article{Li2024,
author = {Li, Qi and Zhou, Xin and Li, Huan and Liu, Zihao and Xiu, Tao and Yao, Yuan and Liang, Song},
title = {Fabrication of UTC-PDs Having High RF Power Output Efficiency},
journal = {IEEE Photonics Technology Letters},
year = {2024},
volume = {36},
number = {17},
pages = {1045--1048},
doi = {10.1109/lpt.2024.3427723}
}
EUVIMED