The Design and Fabrication of a Compact Band-Stop Filter Based on Bulk Acoustic Resonator
IEEE Microwave and Wireless Technology Letters · 2026-11 · 36 (11) · 1745-1748
DOI: 10.1109/lmwt.2026.3697585 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Microwave and Wireless Technology Letters, 2026-11. Verfasst von Yuannian Li und 10 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: NSF of China, NSF of Zhejiang Province, Zhejiang Province Key Research and Development programs.
Abstract (Originalsprache)
In this work, a compact bulk acoustic wave (BAW) resonator–based band-stop filter operating at 2 GHz was designed, fabricated, and characterized. The Mason model of the bulk acoustic resonator is used to design the $\pi $ -topology configuration filter. To optimize filter performance and reduce area mismatch between series and shunt resonators, the series resonator is equivalently divided into two parallel resonators, effectively minimizing the area difference among the resonators that compose of the filter. The fabricated ladder-type filter achieves a center frequency of 2057 MHz with a 3 dB stopband width of 34 MHz and up to 20 dB rejection with only a 9 MHz sideband. The filter shows a passband insertion loss (IL) below 1.2 dB, with a minimum IL of 0.7 dB and band-stop rejection of more than 15 dB. Power-handling tests show that the filter can withstand up to 24 dBm of continuous sine-wave input power. The experimental and simulation results demonstrate that the proposed BAW-based stopband filter achieves low IL, high rejection, and excellent power endurance, providing a promising candidate for integration into next-generation RF front-end modules and compact high-frequency communication systems.
Förderung
- NSF of China
- NSF of Zhejiang Province
- Zhejiang Province Key Research and Development programs
- Fundamental Research Funds for the Central Universities
- Micro/Nano Fabrication Center, Zhejiang University
- Micro/Nano Fabrication Center, International Campus, Zhejiang University
Zitieren
APA
Li, Y., Xuan, W., Jiang, H., Ding, R., Chen, L., Zheng, P., Li, W., Sun, L., Jin, H., Luo, J., & Dong, S. (2026). The Design and Fabrication of a Compact Band-Stop Filter Based on Bulk Acoustic Resonator. IEEE Microwave and Wireless Technology Letters, 36(11), 1745-1748. https://doi.org/10.1109/lmwt.2026.3697585
Vancouver
Li Y, Xuan W, Jiang H, Ding R, Chen L, Zheng P, et al. The Design and Fabrication of a Compact Band-Stop Filter Based on Bulk Acoustic Resonator. IEEE Microwave and Wireless Technology Letters. 2026;36(11):1745-1748. doi:10.1109/lmwt.2026.3697585
BibTeX
@article{Li2026,
author = {Li, Yuannian and Xuan, Weipeng and Jiang, Hong and Ding, Rui and Chen, Long and Zheng, Peng and Li, Wenjun and Sun, Lingling and Jin, Hao and Luo, Jikui and Dong, Shurong},
title = {The Design and Fabrication of a Compact Band-Stop Filter Based on Bulk Acoustic Resonator},
journal = {IEEE Microwave and Wireless Technology Letters},
year = {2026},
volume = {36},
number = {11},
pages = {1745--1748},
doi = {10.1109/lmwt.2026.3697585}
}
EUVIMED