EUVIMEDEUVIMED entdecken
Crossref

A Ruthenium-Coated Low-Adhesion Nanogap MEMS Switch With 2.5-V Actuation, 27-ns Switching, and Ω-Level Contact Resistance

Tae-Soo Kim, Do-Hoon Lim, Sung-Ho Kim, So-Young Lee, Su-Min Jeon, Yeong-Min Cho, Yong-Bok Lee, Jun-Bo Yoon

IEEE Electron Device Letters · 2026-08 · 47 (8) · 1675-1678

DOI: 10.1109/led.2026.3702582 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Electron Device Letters, 2026-08. Verfasst von Tae-Soo Kim und 7 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: Samsung, Basic Science Research Program through the National Research Foundation of Korea (NRF), funded by the Ministry of Education, National Research Foundation of Korea (NRF) Grant funded by the Korean Government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Power gating reduces standby leakage in highly integrated CMOS systems, however, CMOS sleep transistors introduce area overhead and residual leakage. MEMS switches are attractive alternatives because an air gap suppresses off-state leakage and metal-to-metal contact provides low on-state resistance. However, achieving low-voltage actuation, fast switching, low resistance, and turn-off recovery remains challenging. Nanogap scaling reduces switching time and contact resistance, but also aggravates stiction as the restoring force decreases with the gap; increasing the spring constant improves recovery but raises the actuation voltage. This letter demonstrates a ruthenium-coated nanogap MEMS switch that lowers contact adhesion instead of relying on a high restoring force. A native ruthenium oxide layer on ruthenium suppresses metallic bonding at the contact interface. The fabricated switch with a 10-nm source–drain gap turns on at 2.5 V and exhibits 2.29- $\Omega $ contact resistance and 27-ns switching time. The device recovered to the off state for up to ${3}\times {10} ^{{7}}$ cold-switching cycles before failure by stiction. These results demonstrate low-voltage operation, ultrafast switching, and $\Omega $ -level contact resistance in a nanogap mechanical switch.

Förderung

  • Samsung
  • Basic Science Research Program through the National Research Foundation of Korea (NRF), funded by the Ministry of Education
  • National Research Foundation of Korea (NRF) Grant funded by the Korean Government
  • National Research Foundation of Korea

Zitieren

APA

Kim, T., Lim, D., Kim, S., Lee, S., Jeon, S., Cho, Y., Lee, Y., & Yoon, J. (2026). A Ruthenium-Coated Low-Adhesion Nanogap MEMS Switch With 2.5-V Actuation, 27-ns Switching, and Ω-Level Contact Resistance. IEEE Electron Device Letters, 47(8), 1675-1678. https://doi.org/10.1109/led.2026.3702582

Vancouver

Kim T, Lim D, Kim S, Lee S, Jeon S, Cho Y, et al. A Ruthenium-Coated Low-Adhesion Nanogap MEMS Switch With 2.5-V Actuation, 27-ns Switching, and Ω-Level Contact Resistance. IEEE Electron Device Letters. 2026;47(8):1675-1678. doi:10.1109/led.2026.3702582

BibTeX
@article{Kim2026,
  author = {Kim, Tae-Soo and Lim, Do-Hoon and Kim, Sung-Ho and Lee, So-Young and Jeon, Su-Min and Cho, Yeong-Min and Lee, Yong-Bok and Yoon, Jun-Bo},
  title = {A Ruthenium-Coated Low-Adhesion Nanogap MEMS Switch With 2.5-V Actuation, 27-ns Switching, and Ω-Level Contact Resistance},
  journal = {IEEE Electron Device Letters},
  year = {2026},
  volume = {47},
  number = {8},
  pages = {1675--1678},
  doi = {10.1109/led.2026.3702582}
}
Kostenlos starten →