A Hybrid Magnetic Current Sensor With a Multiplexed Ripple-Reduction Loop
IEEE Journal of Solid-State Circuits · 2023-10 · 58 (10) · 2874-2882
DOI: 10.1109/jssc.2023.3273389 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Journal of Solid-State Circuits, 2023-10. Verfasst von Amirhossein Jouyaeian und 5 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 25 Literaturangaben.
Abstract (Originalsprache)
This article presents a hybrid magnetic current sensor for galvanically isolated measurements. It consists of a CMOS chip that senses the magnetic field generated by current flowing through a lead-frame-based current rail. Hall plates and coils are used to sense low-frequency (dc to 10 kHz) and high-frequency (10 kHz to 5 MHz) magnetic fields, respectively. With the help of on- chip calibration coils, the biasing current of the Hall plates is trimmed to match the sensitivity of the Hall and coil signal paths. The sensitivity drift of the coil path with temperature is compensated by using temperature-dependent gain-setting resistors, while the drift of the Hall path is compensated by biasing the Hall plates with a proportional- to-absolute-temperature (PTAT) current. The resulting sensitivity drift is less than 9% from–40 °C to 80 °C. The offset of the Hall plates is reduced by the current spinning technique, and the resulting ripple is suppressed by a multiplexed ripple-reduction loop (MMRL). Fabricated in a standard 0.18- $\mu \text{m}$ CMOS process, the current sensor occupies 4.6 mm2 and draws 7.8 mA from a 1.8-V supply. It achieves a gain variation of only ±2% in a 5-MHz BW. It also achieves high energy efficiency, with an figure of merit (FoM) of 1.6 fW/Hz.
Zitieren
APA
Jouyaeian, A., Fan, Q., Zamparette, R., Ausserlechner, U., Motz, M., & Makinwa, K. A. A. (2023). A Hybrid Magnetic Current Sensor With a Multiplexed Ripple-Reduction Loop. IEEE Journal of Solid-State Circuits, 58(10), 2874-2882. https://doi.org/10.1109/jssc.2023.3273389
Vancouver
Jouyaeian A, Fan Q, Zamparette R, Ausserlechner U, Motz M, Makinwa KAA. A Hybrid Magnetic Current Sensor With a Multiplexed Ripple-Reduction Loop. IEEE Journal of Solid-State Circuits. 2023;58(10):2874-2882. doi:10.1109/jssc.2023.3273389
BibTeX
@article{Jouyaeian2023,
author = {Jouyaeian, Amirhossein and Fan, Qinwen and Zamparette, Roger and Ausserlechner, Udo and Motz, Mario and Makinwa, Kofi A. A.},
title = {A Hybrid Magnetic Current Sensor With a Multiplexed Ripple-Reduction Loop},
journal = {IEEE Journal of Solid-State Circuits},
year = {2023},
volume = {58},
number = {10},
pages = {2874--2882},
doi = {10.1109/jssc.2023.3273389}
}
EUVIMED