EUVIMEDEUVIMED entdecken
Crossref

A Glass/Silicone-Rubber Vertical Contact--Separation Triboelectric Sensor for Self-Powered Vibration Monitoring: Multiphysics Modeling and Frequency Response

Ebrahim Chegini

IEEE Sensors Journal · 2026-11 · 26 (21) · 33528-33537

DOI: 10.1109/jsen.2026.3733636 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, 2026-11. Verfasst von Ebrahim Chegini. Die Arbeit nennt 50 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Distributed vibration monitoring in aerospace structures, rotating machinery, transportation systems, and robotic platforms is often limited by wiring complexity, battery maintenance, sensor density, and the need for externally powered signal-conditioning units. Triboelectric nanogenerator (TENG)-based sensors offer a self-powered alternative, but many existing vertical contact–separation (VCS) TENG models rely on simplified electrostatic or equivalent-circuit descriptions and do not simultaneously resolve mechanical deformation, moving-gap electrostatics, circuit loading, and frequency-dependent terminal response. In this work, a time-resolved multiphysics finite-element framework is developed for a glass/silicone-rubber VCS triboelectric vibration sensor with a floating two-terminal readout. The model co-solves solid mechanics, electrostatics, ALE moving-mesh deformation, and an external electrical circuit to link vibration-induced gap modulation with interfacial field evolution, terminal voltage, electrostatic terminal current, mechanical stress distribution, and load-dependent output. The simulation results show that the voltage envelope is governed mainly by the effective charge density and gap extrema, whereas the electrostatic terminal current is governed by the rate of capacitance and charge evolution. At 100 Hz with a $\mathbf {10}{\,}{\text {M}\Omega }$ load, the model predicts $\mathbf {V}_{pp}=\mathbf {190}.\mathbf {90}$ V and $\mathbf {I}_{pp}=\mathbf {19}.\mathbf {1}\boldsymbol {\mu \textbf {A}}$ . Over the 50–300 Hz sweep, the voltage remains nearly frequency-invariant at $\mathbf {V}_{pp}=\mathbf {190}.\mathbf {89}\pm \mathbf {0}.\mathbf {03}$ V, while the peak-to-peak current increases linearly from approximately 9.55– $57.30~\mu $ A, corresponding to a current sensitivity of $\mathbf {0}.\mathbf {191}f{\,}\boldsymbol {\mu \textbf {A}}~\cdot ~Hz^{-\mathbf {1}}$ . Field and stress maps further reveal dominant air-gap potential drop, edge electric-field fringing, localized contact loading, and delayed mechanical stress response. These results establish a predictive numerical framework for designing frequency-resolving self-powered VCS-TENG vibration sensors for distributed monitoring applications, including aerospace structural-health monitoring and airborne equipment fault diagnosis.

Zitieren

APA

Chegini, E. (2026). A Glass/Silicone-Rubber Vertical Contact--Separation Triboelectric Sensor for Self-Powered Vibration Monitoring: Multiphysics Modeling and Frequency Response. IEEE Sensors Journal, 26(21), 33528-33537. https://doi.org/10.1109/jsen.2026.3733636

Vancouver

Chegini E. A Glass/Silicone-Rubber Vertical Contact--Separation Triboelectric Sensor for Self-Powered Vibration Monitoring: Multiphysics Modeling and Frequency Response. IEEE Sensors Journal. 2026;26(21):33528-33537. doi:10.1109/jsen.2026.3733636

BibTeX
@article{Chegini2026,
  author = {Chegini, Ebrahim},
  title = {A Glass/Silicone-Rubber Vertical Contact--Separation Triboelectric Sensor for Self-Powered Vibration Monitoring: Multiphysics Modeling and Frequency Response},
  journal = {IEEE Sensors Journal},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {33528--33537},
  doi = {10.1109/jsen.2026.3733636}
}
Kostenlos starten →