Noise Suppression and Fault-Tolerance Method of Redundant Angle Sensors Based on Resolver Tracking Estimator for Servo System
IEEE Sensors Journal · 2026-08 · 26 (16) · 25134-25144
DOI: 10.1109/jsen.2026.3711566 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, 2026-08. Verfasst von Jialin Li und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
To address the issue of angle-measurement noise caused by shaft assembly vibration, parameter mismatches in decoding circuit components, and electromagnetic interference, which degrade the pointing accuracy of the space optical pointing and tracking servo system, a measurement noise suppression method for an angle sensor based on a resolver tracking estimator is proposed in this article. First, the angle measurements with abrupt jumps between 360° and 0° at the zero-crossing point are collected from redundant angle sensors, and a strategy is proposed to convert discontinuous signals into continuous ones. Second, a phase discriminator is adopted to acquire the phase error between the estimated and input signals. Combined with a phase-locked loop, the phase of the estimated signal is adjusted for signal tracking and angle estimation. Third, a reconstruction method for the estimator is presented to improve system reliability under sensor failure conditions. Finally, experimental results verify that the proposed method can effectively enhance the pointing accuracy and dynamic tracking capability of servo system in noisy environments, and it possesses good hardware adaptability.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Li, J., Chen, Z., Hu, H., & Liu, X. (2026). Noise Suppression and Fault-Tolerance Method of Redundant Angle Sensors Based on Resolver Tracking Estimator for Servo System. IEEE Sensors Journal, 26(16), 25134-25144. https://doi.org/10.1109/jsen.2026.3711566
Vancouver
Li J, Chen Z, Hu H, Liu X. Noise Suppression and Fault-Tolerance Method of Redundant Angle Sensors Based on Resolver Tracking Estimator for Servo System. IEEE Sensors Journal. 2026;26(16):25134-25144. doi:10.1109/jsen.2026.3711566
BibTeX
@article{Li2026,
author = {Li, Jialin and Chen, Zhen and Hu, Hengzai and Liu, Xiangdong},
title = {Noise Suppression and Fault-Tolerance Method of Redundant Angle Sensors Based on Resolver Tracking Estimator for Servo System},
journal = {IEEE Sensors Journal},
year = {2026},
volume = {26},
number = {16},
pages = {25134--25144},
doi = {10.1109/jsen.2026.3711566}
}
EUVIMED