Development of a Piezoelectric Force Sensor for Space Microvibration Measurement
IEEE Sensors Journal · 2026-08 · 26 (16) · 23724-23734
DOI: 10.1109/jsen.2026.3709683 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, 2026-08. Verfasst von Jun Zhang und 8 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To address the severe interference challenges faced by conventional piezoelectric sensors in complex space environments—caused by the shared configuration of the housing and signal ground—this article proposes a piezoelectric force sensor based on quartz as the core sensing element, featuring an independent layout of housing insulation and reference ground. This design enables the precise measurement of microvibration forces in high-resolution satellite imaging systems. By thoroughly analyzing the mechanism of charge interference under nonideal grounding conditions, a synergistic “shielding-isolation” defense line was established. This approach strips the housing of its electrical attribute as one pole of the signal loop, allowing it to function solely as a force transmission and electromagnetic-shielding component. To resolve the conflict between high insulation protection and minimal mechanical performance loss, PI film was selected as the isolation medium, balancing process feasibility and structural stress continuity. Its optimal thickness was determined through static parametric simulation, effectively cutting off the interference coupling path while ensuring high-fidelity load transmission. To comprehensively verify the performance, modal and multiphysics simulations were conducted, followed by static and dynamic calibration of the prototype and external charge interference experiments. The results indicate that the tangential and normal sensitivities of the sensor are better than 3.8 and 8 pC/N, respectively, with linearity and repeatability errors below 1%. The natural frequencies of each principal axis exceed 6.8 kHz, and the output signal remains undistorted under external charge excitation. The developed sensor demonstrates reliable operational capability and high-precision mechanical measurement performance in space environments.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, J., Shao, H., Liu, J., Zhao, Y., Xu, R., Dai, H., Xu, J., Qiao, R., & Liu, W. (2026). Development of a Piezoelectric Force Sensor for Space Microvibration Measurement. IEEE Sensors Journal, 26(16), 23724-23734. https://doi.org/10.1109/jsen.2026.3709683
Vancouver
Zhang J, Shao H, Liu J, Zhao Y, Xu R, Dai H, et al. Development of a Piezoelectric Force Sensor for Space Microvibration Measurement. IEEE Sensors Journal. 2026;26(16):23724-23734. doi:10.1109/jsen.2026.3709683
BibTeX
@article{Zhang2026,
author = {Zhang, Jun and Shao, Hengkun and Liu, Jinlong and Zhao, Yuqian and Xu, Runze and Dai, Haipeng and Xu, Jiafan and Qiao, Ruimin and Liu, Wei},
title = {Development of a Piezoelectric Force Sensor for Space Microvibration Measurement},
journal = {IEEE Sensors Journal},
year = {2026},
volume = {26},
number = {16},
pages = {23724--23734},
doi = {10.1109/jsen.2026.3709683}
}
EUVIMED