Inkjet-Printed Sol-Gel Titania Precursor Atop MEMS Resonator for Precise Frequency Control and Tuning
IEEE Sensors Journal · 2026-08 · 26 (15) · 22393-22404
DOI: 10.1109/jsen.2026.3700515 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, 2026-08. Verfasst von Jaime Alberto Benavides-Guerrero und 7 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada Research Chair Programs, Fonds de recherche du Québec - Nature et technologies.
Abstract (Originalsprache)
This article presents the design, fabrication, and characterization of microelectromechanical systems (MEMS) resonators functionalized with titanium dioxide ( $\mathrm {TiO_{2}}$ ) droplets deposited via inkjet-printing technology. The integration of oxygen-deficient sol-gel $\mathrm {TiO_{2}}$ precursors onto piezoelectric MEMS resonators demonstrates a novel approach to postprocessing frequency tuning and sensor functionalization. The fabricated devices consist of aluminum nitride (AlN) piezoelectric resonators manufactured using the PiezoMUMPs process, with the subsequent deposition of $\mathrm {TiO_{2}}$ droplets using a custom-formulated ink. Experimental results demonstrate that the resonant frequency can be digitally tuned by controlling the number of deposited droplets (0–50), achieving a tuning sensitivity of about 200 Hz per droplet. The mode shape of the tuned resonator was not affected by such deposition. The performance of the modified resonator also remained stable after over 41 h of operation. The crystalline phase of the $\mathrm {TiO_{2}}$ (amorphous, anatase, or rutile) was found to have a significant influence on the performance of the device. This work establishes inkjet printing as a viable, scalable, precise, and partially reversible method for MEMS postprocessing, opening pathways for integrated chemical sensor arrays, tunable filters, and multifunction microsystems, enabling multifunctional microsystems where postfabrication frequency tuning combines with TiO 2 ’s sensing and photocatalytic capabilities for integrated chemical sensor arrays and self-cleaning resonant devices.
Förderung
- Natural Sciences and Engineering Research Council of Canada
- Canada Research Chair Programs
- Fonds de recherche du Québec - Nature et technologies
Zitieren
APA
Benavides-Guerrero, J. A., Gerlein, L. F., Gratuze, M., Vaussenat, F., Menard, M., Nabki, F., Bolduc, M., & Cloutier, S. G. (2026). Inkjet-Printed Sol-Gel Titania Precursor Atop MEMS Resonator for Precise Frequency Control and Tuning. IEEE Sensors Journal, 26(15), 22393-22404. https://doi.org/10.1109/jsen.2026.3700515
Vancouver
Benavides-Guerrero JA, Gerlein LF, Gratuze M, Vaussenat F, Menard M, Nabki F, et al. Inkjet-Printed Sol-Gel Titania Precursor Atop MEMS Resonator for Precise Frequency Control and Tuning. IEEE Sensors Journal. 2026;26(15):22393-22404. doi:10.1109/jsen.2026.3700515
BibTeX
@article{BenavidesGuerrero2026,
author = {Benavides-Guerrero, Jaime Alberto and Gerlein, Luis Felipe and Gratuze, Mathieu and Vaussenat, Fabrice and Menard, Michael and Nabki, Frederic and Bolduc, Martin and Cloutier, Sylvain G.},
title = {Inkjet-Printed Sol-Gel Titania Precursor Atop MEMS Resonator for Precise Frequency Control and Tuning},
journal = {IEEE Sensors Journal},
year = {2026},
volume = {26},
number = {15},
pages = {22393--22404},
doi = {10.1109/jsen.2026.3700515}
}
EUVIMED