EUVIMEDEUVIMED entdecken
Crossref

Design of a CMUT Structure Enhanced by ALD High- κ HfO 2 and the LOCOS Process

Lei Ren, Tianhao Yan, Wangyang Zhang, Jiandong Shen, Endian Cui, Hanjie Dou, Xianglong Chen, Ke Zhu, Jin Xie, Xiaojing Mu

IEEE Sensors Journal · 15.06.2026 · 26 (12) · 19070-19082

DOI: 10.1109/jsen.2026.3690340 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.06.2026. Verfasst von Lei Ren und 9 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Open Fund of the National Defense Key Discipline Laboratory of New Micro-Nano Devices and System Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article proposes an enhanced capacitive micromachined ultrasonic transducer (CMUT) architecture that integrates an atomic layer deposition (ALD)-deposited high- $\kappa$ HfO2 dielectric layer into the local oxidation of silicon (LOCOS) process to mitigate membrane warpage associated with Si3N4 and to improve electromechanical conversion efficiency. This research confirms the kinetic feasibility of HfO2 as an oxygen barrier in high-temperature processes by modifying the Deal–Grove model. Leveraging the compression effect of the high- $\kappa$ dielectric on the equivalent electrical cavity height, the proposed design strengthens the electromechanical turns ratio and electrostatic driving capability, while enhancing the transmitting performance (RF) and receiving performance ( ${R}_ \eta$ ) by factors of 1.24–1.72 and 1.32–2.41, respectively. Finite element method (FEM) simulations further confirm that the proposed HfO2 structure significantly reduces the collapse voltage (by 30%–45%) while overcoming traditional transduction limitations. Specifically, the electromechanical coupling coefficient ( $\left(k_T^2\right)$ ) increases from 5.7% to 7.6% for 50 μm radius cells and from 11.66% to 16.66% for 70 μm radius cells, representing a substantial relative enhancement of 33.3%–42.9%. Meanwhile, the proposed structure shows improved static capacitance, membrane displacement, and output acoustic pressure. These results support the potential of this structure for future single-chip, low-power CMUT systems.

Förderung

  • National Key Research and Development Program of China
  • Open Fund of the National Defense Key Discipline Laboratory of New Micro-Nano Devices and System Technology

Zitieren

APA

Ren, L., Yan, T., Zhang, W., Shen, J., Cui, E., Dou, H., Chen, X., Zhu, K., Xie, J., & Mu, X. (2026). Design of a CMUT Structure Enhanced by ALD High- κ HfO 2 and the LOCOS Process. IEEE Sensors Journal, 26(12), 19070-19082. https://doi.org/10.1109/jsen.2026.3690340

Vancouver

Ren L, Yan T, Zhang W, Shen J, Cui E, Dou H, et al. Design of a CMUT Structure Enhanced by ALD High- κ HfO 2 and the LOCOS Process. IEEE Sensors Journal. 2026;26(12):19070-19082. doi:10.1109/jsen.2026.3690340

BibTeX
@article{Ren2026,
  author = {Ren, Lei and Yan, Tianhao and Zhang, Wangyang and Shen, Jiandong and Cui, Endian and Dou, Hanjie and Chen, Xianglong and Zhu, Ke and Xie, Jin and Mu, Xiaojing},
  title = {Design of a CMUT Structure Enhanced by ALD High- κ HfO 2 and the LOCOS Process},
  journal = {IEEE Sensors Journal},
  year = {2026},
  volume = {26},
  number = {12},
  pages = {19070--19082},
  doi = {10.1109/jsen.2026.3690340}
}
Kostenlos starten →