A Piezoelectric MFC-Enabled Active Microforce Sensor With High Range-to-Resolution Ratio for Cross-Scale Robotic Cell Micromanipulation
IEEE Sensors Journal · 01.06.2026 · 26 (11) · 16706-16716
DOI: 10.1109/jsen.2026.3683049 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 01.06.2026. Verfasst von Shengzheng Kang und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
During robotic cell manipulation tasks, microforce sensors play an important role to provide real-time force feedback for precise interaction between the robotic manipulator and the environmental cells. In order to accommodate a larger cross-scale range of forces, this article presents an active microforce-sensing strategy based on a macrofiber composite (MFC)-enabled piezoelectric cantilever operating in a closed-loop force-balancing mode. Unlike conventional passive piezoelectric sensors whose usable range is limited by structural nonlinearity and stiffness, the proposed sensor employs a symmetric MFC sandwich beam, in which one MFC layer performs force sensing, while the other provides counteracting actuation under a robust model predictive control (RMPC) scheme. By actively maintaining near-zero tip deflection, the applied microforce is inferred directly from the balancing actuation voltage rather than from the structural deflection. A distributed-parameter dynamic model of the composite beam is derived using the modal superposition, enabling the precise controller synthesis and state estimation via a Kalman observer. Calibration experiments demonstrate a sensing resolution of $10.12~\mu $ N over a measurement range of 21.53 mN, resulting in a range-to-resolution ratio (RtR2) of 2127.5, significantly exceeding that of existing piezoelectric microforce sensors. After that, the effectiveness of the developed sensor is further validated in robotic manipulation of zebrafish embryos and onion cells. The results confirm that the active MFC-enabled force sensor provides a practical route to wide-range, high-resolution force sensing for delicate biological micromanipulation tasks.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Kang, S., Yang, X., Li, Y., Yao, J., & Li, T. (2026). A Piezoelectric MFC-Enabled Active Microforce Sensor With High Range-to-Resolution Ratio for Cross-Scale Robotic Cell Micromanipulation. IEEE Sensors Journal, 26(11), 16706-16716. https://doi.org/10.1109/jsen.2026.3683049
Vancouver
Kang S, Yang X, Li Y, Yao J, Li T. A Piezoelectric MFC-Enabled Active Microforce Sensor With High Range-to-Resolution Ratio for Cross-Scale Robotic Cell Micromanipulation. IEEE Sensors Journal. 2026;26(11):16706-16716. doi:10.1109/jsen.2026.3683049
BibTeX
@article{Kang2026,
author = {Kang, Shengzheng and Yang, Xiaolong and Li, Yao and Yao, Jiafeng and Li, Tao},
title = {A Piezoelectric MFC-Enabled Active Microforce Sensor With High Range-to-Resolution Ratio for Cross-Scale Robotic Cell Micromanipulation},
journal = {IEEE Sensors Journal},
year = {2026},
volume = {26},
number = {11},
pages = {16706--16716},
doi = {10.1109/jsen.2026.3683049}
}
EUVIMED